[Scope of application]: ore, mineral processing, building materials, metallurgy, chemical industry, etc.[Applicable materials]: slime, various ores and other materials[Product Specifications]: 1.28.0m-3.628m[Processing capacity]: 1.9-76.0t/h
Product introduction
According to the working principle of coal slime drying machine belongs to the rotary or rotary drum dryer equipment is a very mature drying equipment and mining equipment manufacturers the coal industry is suitable for drying sludge coal metal and non-metallic ores heavy floating magnetic concentrate and clay cement industry and other industries. It is characterized by high productivity easy to operate. The cylinder is a horizontal rotating cylinder the internal front to back welding have all kinds of copy boards staggered in different angle slime drying machine barrel body according to the needs of different users can be designed with internal use of refractory insulation at
Structure principle
The slime itself has high humidity high adhesion in the drying process of wet coal slime scattered into the equipment through the conveyor belt after a quick slime into a scattered clumps after vacuum drying machine is divided into the following four areas of work:
First the material guide area wet coal slime into this area and the high temperature negative pressure hot air contact is quickly evaporated a large amount of water coal slime in the large angle of the copy board under the action of the shape can not be bonded into the next working area;
The two is to clear the area this area is wet coal slurry copy board took form material screen easy to form a bond of the drum wall material falling phenomenon in this area due to equipment design cleaning device coal cleaning device can quickly clean out the bonding cylinder wall. In this process the cleaning device is broken for material pellet agglomerate thereby increasing the heat exchange area improve the efficiency of heat transfer improve drying rate;
The three is inclined lifting plate area this area is a low temperature drying slime area this area has a low moisture loose state this has not having a bonded area after heat exchange products reach the required water requirements moving into the final discharge area;
Four is out of the area drying the main drum in this area is not a copy board the material in this area rolling to the discharge port complete the whole drying process
Technical advantage
1 the machine has the advantages of strong overload resistance large processing capacity low fuel consumption and low drying cost;
2 the use of parallel drying flue gas and wet material from the same side into the dryer you can use high temperature flue gas to obtain a high evaporation intensity low temperature of the outlet of the dryer high thermal efficiency;
3 according to the different properties of the material to change the operating parameters so that the material in the dryer cylinder body can form a stable fabric curtain mass heat exchange more fully;
4 the new feeding discharging device put an end to the drum dryer feeding clogging discontinuous uneven and return to the phenomenon reducing the dust system load;
5 the new internal structure to strengthen the dispersion of the material has been cleaned and the role of heat conduction the elimination of the cylinder body of the sticky phenomenon the material moisture viscous adaptability stronger;
6 drying machine to achieve a "zero level thrust" greatly reducing the wear of the retaining wheel cylinder running stable and reliable;
7 the use of "heart type wheel device" so that the wheel and roller with the linear contact thus greatly reducing the wear and power loss;
8 according to user requirements to control the product size and moisture dry slime water can be up to 8% of the product the granularity can be controlled below 8mm
Latest case
Slime drying machine Tongli heavy machine own production smoothly in Hubei * * Mining Co. Ltd stable equipment operation standard production various technical indicators have reached the European standard.
Technical parameter
specification (m) (diameter × length) | Cylinder volume
(m³) | Production capacity
(t/h) | Mounting slope
(%) | Maximum intake air temperature
(℃) | Main motor
(kw) | total weight
(t) |
|
| Φ1.2×8.0 | 9.0 | 1.9-2.4 | 3-5 | 700-800 | 7.5 | 9 |
| Φ1.2×10 | 11.3 | 2.4-3.0 | 3-5 | 700-800 | 7.5 | 11 |
| Φ1.5×12 | 21.2 | 4.5-5.7 | 3-5 | 700-800 | 15 | 18.5 |
| Φ1.5×14 | 24.7 | 5.3-6.6 | 3-5 | 700-800 | 15 | 19.7 |
| Φ1.5×15 | 26.5 | 5.7-7.1 | 3-5 | 700-800 | 15 | 20.5 |
| Φ1.8×12 | 30.5 | 6.5-8.1 | 3-5 | 700-800 | 18.5 | 21.5 |
| Φ1.8×14 | 35.6 | 7.6-9.5 | 3-5 | 700-800 | 18.5 | 23 |
| Φ2.2×12 | 45.6 | 9.7-12.2 | 3-5 | 700-800 | 22 | 33.5 |
| Φ2.2×14 | 53.2 | 11.4-14.2 | 3-5 | 700-800 | 22 | 36 |
| Φ2.2×16 | 60.8 | 13.0-16.2 | 3-5 | 700-800 | 22 | 38 |
| Φ2.4×14 | 63.3 | 13.5-16.9 | 3-5 | 700-800 | 37 | 45 |
| Φ2.4×18 | 81.4 | 17.4-21.7 | 3-5 | 700-800 | 37 | 49 |
| Φ2.4×20 | 90.4 | 19.3-24.1 | 3-5 | 700-800 | 45 | 54 |
| Φ2.4×22 | 99.5 | 21.2-26.5 | 3-5 | 700-800 | 45 | 58 |
| Φ2.6×24 | 127.4 | 27.2-34.0 | 3-5 | 700-800 | 55 | 73 |
| Φ3.0×20 | 141.3 | 30.1-37.7 | 3-5 | 700-800 | 75 | 85 |
| Φ3.0×25 | 176.6 | 37.7-47.1 | 3-5 | 700-800 | 75 | 95 |
| Φ3.2×25 | 201 | 42.9-53.6 | 3-5 | 700-800 | 90 | 110 |
| Φ3.6×28 | 285 | 60.8-76.0 | 3-5 | 700-800 | 160 | 135 |