[Maximum feed]: 50mm[maximum output of single machine]: 50[Motor power]: 30[Production capacity]: 10-13[Application range] Chemical raw material factory
Product introduction
Chemical raw material drying machine is used for mechanical equipment for drying of chemical raw materials the machine is mainly composed of a rotary body lifting plate a driving device and a supporting device and a sealing ring and other components. Our company chemical raw materials drying equipment using the new lifting plate device has the function of guiding flow and scatter the material and so on can make the material in the dryer section of comprehensive radial uniform material screen become thin and the whole state complete contact with hot air to make full use of heat energy to
Structure principle
Chemical raw material drying equipment is made of liquid or slurry material to form a thin film on the surface of the cylinder steam or other heat carrier heating process and a turn in the drum drying was completed using the product scraper scraping down exposed surface of the roller again and raw material contact form thin film drying drying machine main chemical raw materials. Used for drying powder and granular materials. Conventional heating such as flames hot air and steam drying are using the principle of heat conduction the heat from the heated external internal gradually make the center of the object temperature. Widely used in food chemical pharmaceutical and other industries viscous paste material production and drying process. With steam or thermal oil as heat source large heating area high thermal efficiency uniform heating. The drying rate is large the cylinder wall wet material heat and mass transfer process of membrane from inside to the outside To the same large temperature gradient the membrane material to keep high evaporation intensity. Short drying time usually 7-30 seconds suitable for heat sensitive materials
Technical advantage
The chemical raw material drying machine has the following characteristics: high quality high efficiency energy saving and environmental protection:
1 to achieve the material without pollution and uniform drying and can greatly reduce the drying temperature;
2 the drying rate is usually increased several times more than 2 times more than the general oven the production efficiency is greatly improved;
3 indirect heating the material will not be contaminated equipment maintenance operation is simple easy to clean safe and clean production
4 low operating costs chemical raw materials drying equipment covers an area of small
Latest case
Chemical raw material drying machine Tongli heavy machine manufacturing put into production in South Africa * * * chemical factory stable equipment operation standard production
Technical parameter
| Specification | Capacity (t/h) | power (kw) | Cylindrical speed (r/min) | Reducer model | Weight (t) |
| Φ0.6×8 m | 1.5-2.8 | 4 | 8 | JZQ 250-16-Ⅰ | 5.1 |
| Φ0.8×10 m | 3.0 | 4 | 7.5 | JZQ 350-16-Ⅰ | 6.9 |
| Φ10×10 m | 3.3-4.9 | 5.5 | 5.8 | JZQ 400-16-Ⅰ | 7.5 |
| Φ1.2×10 m | 4-6 | 7.5 | 4.8 | ZL 50-16-Ⅰ | 13.5 |
| Φ1.5×12 m | 4-6 | 10 | 4.8 | JZQ 500-Ⅲ-2F | 18.9 |
| Φ1.5×15 m | 7-12 | 18.5 | 4.8 | ZQ 500-Ⅲ-2F | 21 |
| Φ1.8×12 m | 7-12 | 18.5 | 4.1 | JZQ 50-16 Ⅱ-2 | 22.83 |
| Φ2.2×12 m | 12 | 18.5 | 3.2 | JZQ 650- Ⅲ | 37.6 |
| Φ2.2×14 m | 12 | 22 | 3.2 | JZQ 650- Ⅲ | 40 |
| Φ2.2×16 m | 10-13 | 30 | 3.2 | JZQ 750- Ⅲ | 45 |
| Φ2.4×14 m | 10-14 | 30 | 3 | JZQ 750- Ⅲ | 51 |
| Φ2.4×18 m | 25 | 37 | 3 | ZL 85-13- Ⅰ | 54 |
| Φ2.4×20 m | 32-36 | 37 | 3 | ZL 85-13-Ⅰ | 54.14 |
| Φ3×20 m | 40-50 | 55 | 2.59 | ZL 100-16-Ⅰ | 78 |
| Φ3×25 m | 45-58 | 75 | 2.59 | ZL 100-16-I | 104.9 |