[Maximum feed]: 50mm[maximum output of single machine]: 50[Motor power]: 45[Application range]: lignite drying production line[Applicable materials]: lignite
Product introduction
Lignite dryer is one of the Tongli Heavy Machinery production of drying machine series of Shanghai the equipment is suitable for drying lignite coal coal coal coke and other granular paste material. Especially for the fly ash coke coal has a drying effect is unique the device is also known as coal lignite drying machine drying machine. The lignite drying equipment a full set of advanced technology equipment performance unique. Shanghai Tongli mechanical innovation of internal lignite drying machine for the unique physical characteristics of various coal lignite dewatering requirements and to meet the requirements of production. Lignite drying machine barrel diameter from the diameter of 1.5 ~ 5.2m 10 ~ 30m in length the amount of hours from 10 ~ 500t/h feeding water: 20 ~ 50 ± 5% after drying the moisture can be reduced to 5 to 15 ± 5% (adjustable).
Structure principle
1. Lignite drying machines placed zero thrust no axial force burden. Effectively reduce the wheel ring ring to the taper wear prolong the service life of the bearing reduce the accident rate improve equipment utilization rate reduce the cost of repair.
2. Are expected to throw the material screen more complete heat and moisture exchange fully index was significantly lower than that of 1200kcal/kg · H2O unit heat consumption so saving energy.
3. The exhaust gas temperature is close to or slightly higher than the dew point moisture nearly saturated state also significantly reduced the consumption.
The temperature treatment using surface free water
4. High wet material; and the structure of water water of hydration and humidity material is using the low temperature treatment make full use of the "hot" and "wet" two substances potential as power that will not cause thermal deformation of metal but also save the energy make the equipment operation more safety.
5. Use new technology and new process completely fit for the characteristics of lignite precipitation particles the operating temperature is lower than the ignition temperature even in the absence of inert gas replacement also won't cause a fire.
Fully guarantee the frequency control system
6. Excellent: the heating temperature can be adjusted and controlled; the processing amount can be adjusted and controlled; precipitation capacity can be adjusted and controlled.
7. The transmission system of insurance coefficients were magnified 20-30 times fully meet the gas chemical all-weather continuous operation for a long time for its high yield stable yield provide standard water full margin of dry coal.
Technical advantage
1. Strong anti-overload capability, large processing capacity, low fuel consumption and low drying cost.
2. By adopting the downstream drying method, the flue gas and the wet material enter the dryer from the same side, and the high-temperature flue gas can be used to obtain a high evaporation intensity, the dryer outlet temperature is low, and the thermal efficiency is high.
3. The dispersing device, the feeding device, the discharging device and the cyclone dust removing device are adopted, thereby eliminating the phenomenon that the feeder is blocked, discontinuous, uneven and returning, and the load of the dust removing system is reduced.
4. The dryer adopts the “centering type wheel device”, so that the cooperation between the roller and the roller ring is always in linear contact, thus greatly reducing the wear and power loss.
5. It adopts open gear transmission and has the characteristics of reasonable structure, simple operation, long service life, high efficiency and convenient maintenance.
In the drying production process, most of the downstream operations, its main features are:
1. At the hot end of the dryer, the temperature difference between the material and the hot gas is large, the heat exchange process is rapid, and a large amount of water is easily evaporated, which is suitable for materials with higher initial moisture.
2. After the viscous material enters the dryer, the surface moisture is easy to evaporate, which can reduce the adhesion and facilitate the material movement. When used to dry wet coal, it can avoid the high temperature gas directly contacting dry coal and causing fire.
3. The low pressure of the hot end of the downstream operation can reduce the amount of air leakage entering the drying, which is beneficial to stabilize the temperature and flow rate of the hot gas in the dryer.
4. Feeding and coal supply are set with the hot end of the dryer, and the workshop layout is convenient.
5, the downstream operation of the dryer discharge temperature is low, generally can be transported by a belt conveyor.
Latest case
The lignite dryer manufactured by Tongli Heavy Machinery Co., Ltd. was successfully put into operation in South Africa *** Steel Company, and the equipment was running stably and reached the standard.
Technical parameter
Specifications (m) | Capacity (t/h) | Motor model→Power (kw) | Reducer model | Feed water (%) | Fuel calorific value of coal | Discharge water (%) |
| Φ1.2x10 | 2.5-3 | M160M-6→7.5 | ZQ350Ⅱ-25 | 25±5 | ≥5500 | ≤13 |
| Φ1.5x14 | 7-9 | Y180L-6→15 | ZQ400Ⅱ-31.5 | 25±5 | ≥5500 | ≤13 |
| Φ1.5x18 | 9.5-12 | Y180L-6→15 | ZQ400Ⅱ-31.5 | 27±5 | ≥5500 | ≤13 |
| Φ1.8x14 | 12-15 | Y200L-6→18.5 | ZQ400Ⅱ-31.5 | 25±5 | ≥5500 | ≤13 |
| Φ1.8x18 | 14-18 | Y200L1-6→18.5 | ZQ400Ⅱ-31.5 | 27±5 | ≥5500 | ≤13 |
| Φ2.0x18 | 18-22 | Y200L2-6→22 | ZQ50Ⅱ-31.5 | 25±5 | ≥5500 | ≤13 |
| Φ2.0x20 | 18-23 | Y200L2-6→22 | ZQ50Ⅱ-31.5 | 30±5 | ≥5500 | ≤13 |
| Φ2.2x18 | 21-25 | Y200L2-6→22 | ZQ65Ⅱ-31.5 | 27±5 | ≥5500 | ≤13 |
| Φ2.2x20 | 22-25 | Y225M-6→30 | ZQ65Ⅱ-31.5 | 30±5 | ≥5500 | ≤13 |
| Φ2.4x20 | 25-29 | Y225M-6→30 | ZQ75Ⅱ-31.5 | 27±5 | ≥5500 | ≤13 |
| Φ2.4x22 | 26-30 | Y225M-6→30 | ZQ75Ⅱ-31.5 | 30±5 | ≥5500 | ≤13 |
| Φ2.6x20 | 28-33 | Y250M-6→37 | ZQ85Ⅱ-31.5 | 25±5 | ≥5500 | ≤13 |
| Φ2.6x24 | 29-35 | Y250M-6→37 | ZQ85Ⅱ-31.5 | 30±5 | ≥5500 | ≤13 |
| Φ3.0x20 | 45-50 | Y280S-6→45 | ZQ100Ⅱ-31.5 | 25±5 | ≥5500 | ≤13 |