[Maximum feed]: 10mm[maximum output of single machine]: 40[Motor Power]: 75[Scope of application]: Kaolin calcination production line[Applicable materials]: Kaolin
Product introduction
Kaolin dryer is made up of Stove Main Rotary Body Screw Conveyor Cyclone Separator Air-lock and Fan and matched Pipes which can realize to reduce the moisture from 60%-10%. The heat generator combined fan is not included in our quotation. Mainly used in building material metallurgy chemical plant cement plant for drying of limestone slag coal powder slag and clay stone. The dryer has advantages of reasonable structure high efficiency low energy consumption and convenient for transportation.
Structure principle
Materials are sent to hopper of rotary dryer by belt conveyor or bucket elevator. The barrel is installed with slope to horizontal line. Materials enter the barrel from the higher side and hot air enters the barrel from the lower side materials and hot air mix together. Materials go to the lower side by gravity when the barrel rotates. Lifters on the inner side of barrel lift materials up and down to make materials and hot air mix completely. So drying efficiency is improved.
Technical advantage
1. Large capacity less fuel consumption dry low cost;
2. Has the characteristics of high temperature resistant can use of materials at high speed high temperature hot air drying;
3. Extensible ability design considering the production surplus even a modest yield increase also need not change equipment;
4. Equipment structure of self-aligning type tug tug with roller ring fit well greatly reduces the wear and power consumption;
5. Specially designed gear wheel structure greatly reduced due to the tilt work level thrust; Resistance to overload ability cylinder smooth operation high reliability.
Latest case
Kaolin Dryer of Tongli heavy mechanism is put into operation smoothly in Wuhan * * Mining Co. Ltd. and the operation of the equipment is stable and up to the standards of production the technical indicators have reached the European standard.
Technical parameter
Model (mm) | Gradient(%) | Revolving speed(r/min) | Inlet temperature(℃) | Power(kw) | Capacity(t/h) | Weight(t) |
Ф600x6000 | 3-5 | 3-8 | ≤700 | 3 | 0.5-1.5 | 2.9 |
Ф800x8000 | 3-5 | 3-8 | ≤700 | 4 | 0.8-2.0 | 3.5 |
Ф800x10000 | 3-5 | 3-8 | ≤700 | 4 | 0.8-2.5 | 4.5 |
Ф1000x10000 | 3-5 | 3-8 | ≤700 | 5.5 | 1.0-3.5 | 5.6 |
Ф1200x10000 | 3-5 | 3-8 | ≤700 | 7.5 | 1.8-5 | 14.5 |
Ф1200x12000 | 3-5 | 3-8 | ≤700 | 11 | 2-6 | 14.8 |
Ф1500x12000 | 3-5 | 2-6 | ≤800 | 15 | 3.5-9 | 17.8 |
Ф1800x12000 | 3-5 | 2-6 | ≤800 | 18 | 5-12 | 25 |
Ф2200x12000 | 3-5 | 1.5-6 | ≤800 | 18.5 | 6-15 | 33 |
Ф2200x18000 | 3-5 | 1.5-6 | ≤800 | 22 | 10-18 | 53.8 |
Ф2200x20000 | 3-5 | 1.5-6 | ≤800 | 30 | 12-20 | 56 |
Ф2400x20000 | 3-5 | 1.5-5 | ≤800 | 37 | 18-30 | 60 |
Ф3000x20000 | 3-5 | 1.5-5 | ≤800 | 55 | 25-35 | 78 |
Ф3000x25000 | 3-5 | 1.5-5 | ≤800 | 75 | 32-40 | 104.9 |