Welcome Customer !

Membership

Shanghai Tongli Heavy Machinery Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 烘干机

Xwboo>Products

Shanghai Tongli Heavy Machinery Co., Ltd.Free·1YRS

  • E-mail

    info@tlzjmachinery.com

  • Phone

    008621-33587123

  • Address

    1885, Duhui Road, Minhang District , Shanghai

Contact Now

Wind sweeping coal mill

Model
Nature of the Manufacturer
Other
Product Category
Coal mill
Place of Origin
City, Province
Overview
[Maximum feed]: 30[maximum output of single machine]: 40[Motor power]: 1250[Scope of application]: Preparation of coal powder[Applicable materials]: various hardness coal
Product Details

Product introduction

Coal mill is also called wind sweep coal mill. It is used to grind and dry all kinds of hardness coal! Coal mill can be divided into low speed coal mill, medium speed coal mill and high speed coal mill. The three coal mills have their own strengths, and customers can choose the coal mill suitable for production according to actual needs.

Structure principle

The raw coal enters the feeding device of the mill from the feeding equipment, and the hot air with a temperature of about 300 °C also enters the feeding device through the air inlet pipe. The drying chamber is provided with a special lifting plate to lift the raw coal, so that the raw coal is raised. Here, a strong heat exchange is performed to obtain the drying, and the dried coal block enters the grinding chamber through a double-layer partition plate provided with a lifting plate.

The grinding chamber is provided with an abrasive body (steel ball), and the coal block is pulverized and ground into pulverized coal in the chamber. At the same time that the coal block is pulverized, the pulverized coal powder and gas are taken out of the mill together by a special draft fan through the discharge device of the mill, and the coarser particles are returned to the powder through the return screw of the discharge device. Grind again in the grinding chamber.

Technical advantage

1. The grinding efficiency is high. The coal mill is designed for the inner liner of the grinding mill. Different lining structures are adopted for different stages in the coal mill, and the grinding efficiency is greatly improved.

2. Customized according to requirements, flexible configuration, depending on the model, the coal mill can be either edge drive or central drive, flexible configuration.

3. The output is 12~38t/h, and the finished product fineness can reach 80μmR 3%

Latest case

[Unit] Xinjiang Tacheng xxx Building Materials Co., Ltd.

[device name] coal mill

[Scale] 4000t/d

Technical parameter

Vertical mill specificationsYield
(t/h)
Fineness
(80umSieve)
Moisturepower(kw)
ZJTL1720C16~18R≤8%≤0.5%250
ZJTL2020C20~23355
ZJTL2220C30~35500
ZJTL2520C40~45710
ZJTL2820C55~58900
ZJTL3230C75~781250
ZJTL3640C110~1151800
 

Similar Product Recommend