Welcome Customer !

Membership

Shanghai Tongli Heavy Machinery Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 烘干机

Xwboo>Products

Shanghai Tongli Heavy Machinery Co., Ltd.Free·1YRS

  • E-mail

    info@tlzjmachinery.com

  • Phone

    008621-33587123

  • Address

    1885, Duhui Road, Minhang District , Shanghai

Contact Now

Medium speed coal mill

Model
Nature of the Manufacturer
Other
Product Category
Coal mill
Place of Origin
City, Province
Overview
[Maximum feed]: 30mm[single machine maximum output]: 120[Motor power]: 1800[Scope of application]: Pulverized coal preparation system[Applicable materials]: bituminous coal, anthracite, lignite, etc.
Product Details

Product introduction

Medium-speed pulverizer refers to a coal mill with a speed of 50 to 300 r/min during operation. It belongs to the specialized equipment for preparation of blast furnace iron-smelting accessories. The medium-speed coal pulverizer can provide suitable auxiliary materials--- Pulverized coal for the blast furnace ironmaking system. The traditional speed is divided into medium speed low speed high speed coal mill. Medium-speed pulverizer is suitable for grinding pulverized coal powder and medium-hard materials such as lean coal. It can be widely used in electric power metallurgy building materials chemical industry and other industries especially for blast furnace pulverized coal milling system that requirse large quantities of bituminous coal.

Structure principle

In the medium-speed coal mill the motor drives the disc to rotate through a speed reducer and the material enters the center of the disc through the lock feeder and the hot air enters the mill from the air inlet. With the rotation of the disc the material moves to the edge of the disc under the effect of centrifugal force. After passing through the annular groove on the disc it is crushed by the grinding roller and pulverized. The material after pulverization is brought up by the wind-loop high-speed airflow at the edge of the disc. The granules fall directly on the grinding disc and reground. When the material in the airflow passes through the upper separator the coarse powder falls from the cone to the grinding disc and is crushed again. The qualified fine powder is milled along with the air flow. The dust device is collected that is the product the moisture-containing material is dried during the contact with the hot air flow and the temperature of the hot air can be adjusted to meet the requirements of different humidity materials and reach the required product moisture. By adjusting the separator the required fineness of different products can be achieved.

 

Medium speed coal mill. The material is fed into the first chamber of the mill through the feeding device through the hollow shaft of the feed material. The chamber has a stepped liner or a corrugated liner which contains steel balls of different specifications. The cylinder rotates to generate centrifugal force to bring the steel ball to a certain height. After falling it will produce heavy blow and grinding effect on the material. After the raw material reaches the rough grinding in the first position it enters the second position via a single-layered partition board. The leveling insert has a flat lining plate with steel balls inside and the material is further ground. The powder is discharged through the discharge sampan plate to complete the grinding operation.

Technical advantage

1 Unique shift gapping technology

2 Double rotor up and down two levels of smash

3 Hydraulic electric starter shell

4. The coal crusher does not have a sieve bottom high-humidity materials never block.

5 Wear-resistance combination hammer

Latest case

1、Shanxi *** Building Material Co. Ltd. 5000t/d medium speed coal mill

2、India Ali *** two 4000 t/d medium-speed coal mills

  .

  .

Technical parameter

SpecificationLM1300KLM1500KLM1700KLM1900KLM2200KLM2400KLM2800KLM3400KLM3700K
Capacity(t/h)10-4013-5018-7023-8536-13541-16450-19670-26090-320
Finished finenessμm840-33840-33840-33840-33840-33840-33840-33840-33840-33
mesh20-42520-42520-42520-42520-42520-42520-42520-42520-425
Finished moisture≤1%≤1%≤1%≤1%≤1%≤1%≤1%≤1%≤1%
Best input material moisture<4%<4%<4%<4%<4%<4%<4%<4%<4%
 Moisture content of materials to be dried<15%<15%<15%<15%<15%<15%<15%<15%<15%
Power(KW)200280400500800900125018002500
Similar Product Recommend