Product introduction
Drum granulator is with granulation rate of 70% average intensity of granulation >10N equal product nutrient strong adaptability can also add the phosphoric acid or ammonia solutionslurryetc from machine entrails into the steam. The compound fertilizer production process of chemical reactions can be completed in the cylinder and it also is used to supplement moisture humidifying process of compound fertilizer production.
Structure principle
Drive belt and pulley by the main motor transmit to drive shaft through reducer open gear installed on the drive shaft engage with the big gear ring fixed on the body of the machine and opposite to work. Material join from the feed end through the internal cylinder. Under the effect of cylinder special structure it is granulated and discharged from outlet. Mass production can be realized by material’s feed continuously and granulator’s revolving continuously.
Technical advantage
1.High strength of pelletizing wear resistance low energy consumption long service life convenient operation and maintenance.
2.70% of pelletizing rate small amount of returns return product particle size is small and can be granulated again.
3.Ventilation with steam heating improving material temperature lower moisture after making the material into the balls increasing the efficiency of dry.
4.With rubber lining engineering plastics raw material is not easy to stick and anti-corrosion insulation effect
5.Large output low power consumption low maintenance cost.
Latest case
150000 ton per year compound fertilizer production line for China National Chemical Engineering Corporation (export to Pakistan)
Main equipment
φ2.4×7m granulator
φ3.2×25m dryer
φ2.8×15m cooler
φ1.6×4.3m coater
Project period: it took 10 months from process design civil construction and equipment installation
Technical parameter
| Specification | Shell | Poduction capacity | Main motor | Main reducer | Sizes ( L× W × H) | Weight |
| I.D. | L. | Slope | Speed | Model | Power | Model | Patio |
| m | mm | mm | ( ° ) | r/min | t/d | | kw | | | mm | t |
| Φ1.8×6 | 1800 | 6000 | 2.5 | 12.39 | ~8 | Y200L1-6 | 18.5 | ZL42.5 | 10 | 8000×3335×3350 | 16.0 |
| Φ1.8×8 | 1800 | 8000 | 2.5 | 12.39 | ~10 | Y225M-6 | 30 | ZL50 | 10 | 10000×3380×3350 | 17.6 |
| Φ2.0×8 | 2000 | 8000 | 2.5 | 10.8 | ~14 | Y250M-8 | 30 | ZL50 | 8 | 12000×3900×3750 | 26.3 |
| Φ2.0×10 | 2000 | 10000 | 2.5 | 10.8 | ~16 | Y250M-8 | 30 | ZL50 | 8 | 14000×3900×3750 | 28.0 |
| Φ2.2×8 | 2200 | 8000 | 2.5 | 10.7 | ~20 | Y280S-8 | 37 | ZL60 | 9 | 9500×4410×3900 | 29.0 |
| Φ2.4×8 | 2400 | 8000 | 2.5 | 9.75 | ~25 | Y250M-4 | 55 | ZL65 | 14 | 10290×4636×4955 | 42.0 |
| Φ2.6×10 | 2600 | 10000 | 2.0 | 9.17 | ~30 | Y280M-6 | 55 | ZL65 | 14 | 12200×4850×4262 | 43.0 |
| Φ2.8×8 | 2800 | 8000 | 1.5 | 9.18 | ~35 | Y315M-6 | 90 | ZL85 | 11.2 | 10175×5455×5264 | 53.0 |
| Φ3.0×8 | 3000 | 8000 | 1.1 | 9.8 | ~45 | Y315M-4 | 132 | ZL100 | 18 | 9915×6700×5608 | 60.0 |
| Φ3.2×10 | 3200 | 10000 | 1.8 | 8.54 | ~50 | Y315L1-4 | 160 | ZL100 | 20 | 12100×5050×5800 | 75.2 |