Welcome Customer !

Membership

Zhangjiagang Hairun Environmental Protection Machinery Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 上料机

Xwboo>Products

Zhangjiagang Hairun Environmental Protection Machinery Co., Ltd.Free·1YRS

  • E-mail

    854945951@qq.com

  • Phone

    0512-58661578

  • Address

    Yongli Village, Leyu Town, Zhangjiagang City, Suzhou City, Jiangsu Province

Contact Now

Liquid metering conveyor

Model
Nature of the Manufacturer
Other
Product Category
Liquid metering conveyor
Place of Origin
City, Province
Overview
Liquid metering conveyor
Product Details

The centrifugal pump for liquid conveying equipment is composed of two main parts: one is the rotating part including the impeller and the pump shaft; the other is the static part composed of the pump casing, stuffing box and bearing. But the most important parts are the impeller and the pump casing.

impeller

The impeller is the core component of a centrifugal pump. The impeller with front and rear cover plates on both sides of the impeller is called a closed impeller. It is suitable for conveying clean liquids. Generally, this type of impeller is used in centrifugal pumps. There are no front and rear cover plates, and they are only composed of blades and hubs called open impellers. Only the rear cover is called a semi-closed impeller. Open impeller and semi-closed type are suitable for conveying liquid suspension containing solid particles because the flow path is not easy to be blocked. However, since there is no cover plate, the liquid tends to flow backward when moving between the leaves, so the efficiency is also low. During operation of a closed or semi-closed impeller, a part of the high-pressure liquid leaving the impeller can leak into the cavity on both sides between the impeller and the pump casing, and the liquid suction port on the front side of the impeller is low pressure, so the liquid acts on the front of the impeller. When the pressure on the rear and the rear sides are not equal, an axial thrust in the direction of the suction inlet of the impeller is generated, causing the impeller to move toward the suction inlet, causing the contact between the impeller and the pump casing to wear, and in severe cases, causing the pump to vibrate and destroy the pump Normal operation. In order to balance the axial thrust, the easiest method is to drill some small holes in the rear cover of the impeller. These small holes are called balancing holes. Its role is to make a part of the high-pressure liquid in the cavity between the rear cover and the pump casing leak to the low-pressure area, so as to reduce the pressure difference on both sides of the impeller, so that the liquid conveying equipment plays a role in balancing a part of the axial thrust, but It also reduces the efficiency of the pump.


Similar Product Recommend