EG641J

This valve is specially used to control non corrosive or general corrosive medium, the inner surface of the valve body is not lined or covered with various rubber, which is suitable for different working temperature and liquid pipeline.
Note: parameters are for reference only, or are not full. Valve can be used in accordance with the requirements of different pressure, material, diameter, drive, etc.. Specific please contact or online advisory contact. Body: cast iron, nodular cast iron, carbon steel, stainless steel
Valve cover: cast iron, nodular cast iron, carbon steel, stainless steel
Lining: no lining, rubber
Diaphragm: Rubber
Valve: Cast Iron
Cylinder: aluminum alloy, carbon steel
Pneumatic film: Rubber
Stem: carbon steel, stainless steel handwheel: Cast Iron Lining layer: electric spark detection
Test and inspection according to BS6755 standard
Nominal pressure: PN (MPa)
Body: PN * 1.5
Seal: PN * 1.1

DN	Nominal pressureMPa	Working pressure MPa	L mm	D mm	D1 mm	n-Фd mm	f mm	H mm	D0 mm	B mm	Code  ES	Gas pressureMPa	Air source connector MPa	Gas consumptioncm3	quality Kg/kilos
15	1.6	1.6	108	95	65	-	2	-	-	-	-	-	-	-	-
20			117	105	75	4-13.5	2	343	140	168	54	0.3	1/8	163.87	5.6
25			127	115	85	4-13.5	2	345	140	168	54	0.3~0.4	1/8	196.65	6.8
32			146	140	100	4-17.5	2	363	140	260	55	0.3~0.4	1/8	229.4	7.7
40			159	150	110	4-17.5	2	430	140	260	55	0.3~0.4	1/4	1458.7	13.9
50			190	165	125	4-17.5	2	575	140	260	55	0.3~0.4	1/4	3162.7	24.5
65	1.0	1.0	216	185	145	4-17.5	2	588	140	260	55	0.3~0.4	1/4	3243	29
80			254	200	160	8-17.5	2	769	165	425	56	0.4~0.5	3/8	6636.8	63
100			305	220	180	8-17.5	2	816	280	425	57	0.4~0.5	3/8	6948	66
125			356	250	210	8-17.5	3	820	280	425	57	0.4~0.5	3/8	7374.2	75
150			406	285	240	8-22	3	920	280	549	58	0.5	3/8	10652	125
200	0.6	0.6	521	340	295	8-22	3	1010	280	549	58	0.6	3/8	16715	206
250			635	395	350	-	5	-	-	-	-	-	-	-	-