Electric fluorine diaphragm valve

This valve is specially used to control non corrosive or general corrosive medium, the inner surface of the valve body is not lined or covered with various rubber, which is suitable for different working temperature and fluid pipeline. Suitable temperature: less than or equal to 85 DEG C and less than or equal to 100 DEG C and less than or equal to 120 DEG C, C = 150 (according to the liner and diaphragm material)
Note: parameters are for reference only, or are not full. Valve can be used in accordance with the requirements of different pressure, material, diameter, drive, etc.. Specific please contact or online advisory contact. Body: cast iron, nodular cast iron, carbon steel, stainless steel
Valve cover: cast iron, nodular cast iron, carbon steel, stainless steel
Lining: no lining, rubber
Diaphragm: Rubber
Valve: cast iron, carbon steel
Stem: carbon steel
Electric device: assembly Lining layer: electric spark detection
Test and inspection according to GB/T13297 standard
Nominal pressure: PN (Mpa) valve body: PN * 1.5
Seal: PN * 1.1

DN mm	Nominal pressureMPa	Working pressure MPa	L （mm）	D （mm）	D1 （mm）	n-φd （mm）	f （mm）	h （mm）	Model	Output torque	Opening and closing time	quality
15	0.6	0.6	125	95	65	4-14	2	-	-	-	-	-
20			135	105	75	4-14	2	-	-	-	-	-
25			145	115	85	4-14	2	4445	Z5-18/16	50	17	40
32			160	140	100	4-18	2	457	Z5-18/16	50	20	42
40			180	150	110	4-18	3	466	Z5-18/16	50	14	45
50			210	165	125	4-18	3	480	Z10-18/16	50	20	50
65			250	185	145	4-18	3	517	Z10-18/16	150	28	60
80			300	200	160	4-18	3	539	Z10-36/25	100	16	70
100			350	220	180	8-18	3	576	Z10-36/25	100	17	80
125			400	250	210	8-18	3	634	Z15-18/25	150	32	104
150			460	285	240	8-22	3	660	Z15-18/25	150	53	125
200		0.4	570	340	295	8-22	4	860	Z20-18/25	200	53	180
250			680	395	350	12-22	4	-	Z20-18/25	200	53	280
300			790	445	400	12-22	4	1003	Z20-18/25	300	45	434
350			900	505	460	16-22	4	-	ZD30-36a	300	45	-
400			1000	565	515	16-25	4	-	-	-	-	-