Electric pneumatic pipe clamp valve

Pipe clamp valve is the use of the valve rubber tube with flat hydraulic or pneumatic fluid will make the tube deformation fold truncation.
Characteristic：
No pressure loss, no blockage, no leakage, water hammer impact
L is especially suitable for liquid solid and gas - solid two phase flow
L rubber sleeve with fiber reinforced structure, abrasion resistance, anti fatigue
Note: parameters are for reference only, or are not full. Valve can be used in accordance with the requirements of different pressure, material, diameter, drive, etc.. Specific please contact or online advisory contact. L DN25~300 DN25~300 cast aluminum body: cast iron cast steel DN25~300
Flange joint: cast iron DN25~300316LDN40~200
Pipe material and the temperature range of -5~80 DEG C: natural rubber ethylene propylene rubber -5~120 C three yuan
Food grade: food grade natural rubber sleeve

caliber（DN）	DN25~200	DN250~300
Working pressure	ma×4bar	ma×3bar
Control pressure	ma×6bar	ma×4.5bar
Maximum pressure difference	2bar	ma×1.5bar

caliber（DN）		40	50	65	80	100	125	150	200	250	300
Exterior dimension	L	150	180	180	220	276	345	414	550	680	820
	H	40	60	60	75	95	120	145	182	229	278
	I	26	27	28	30	36	48	52	65	82	98
	D	150	165	200	200	220	250	285	340	405	480
Flange standard		PN10  DN40	PN10  DN50	PN10  DN65	PN10  DN80	PN10  DN100	PN10  DN125	PN10  DN150	PN10  DN200	PN10/20  DN250	PN10/20  DN300