Modbus RTU 40m Range Sensor UART
This MB2A-40m model you see is JRT new product of working on requirements RS-485 Modbus RTU protocol responds. With USART compatibility, customers can use to connect to arduino, Raspberry Pi, MCU etc. This range sensor is digital interface with phase & RXTX serial bus communications to measure distance accurately.
Specification parameters
Measurement Range: 0.03 ~ 40 m
Resolution: 1mm
Measurement Accuracy: +-1mm
Serial port: UART
Mechanical Dimensions: 45*25*12mm
Laser type: 620 ~ 690nm, Class II, <1>1>
Baud rate: 9600/19200/38400/57600/115200, default 38400
Indicating Light: Red Laser
Measure Mode: Single /Continuous measure
Communication Protocol: Modbus RTU
Working temperature: 0 ~ 40 degree
Storage temperature: -25 ~ 60 degree
40m Range Sensor Working Principle
Note:
1. Under bad measure condition, like environment with strong light or the diffuse reflectance of measuring point over-high or low, the accuracy would have bigger amount of error: ±1 mm+40PPM.
2. Under strong light or bad diffuse reflectance of target, please use a reflection board
3. Operating temperature -10 ℃~40 ℃ can be customized.
More Detailed Pictures
How to pack your Modbus RTU 40m Range Sensor UART?
Chengdu JRT Main Ranging Modules: Industrial Laser Distance Sensors, Laser Rangefinder Sensor, Tof LiDAR Sensors.
Looking for ideal Modbus RTU 40m Manufacturer & supplier ? We have a wide selection at good prices to help you get creative. All the 40m Range Sensor are quality guaranteed. We are China Origin Factory of 40m Modbus RTU. If you have any question, please feel free to contact us.