30m Arduino Range Sensor in Robotics
30m long range laser Distance Sensor from JRT solve a wide variety of industrial applications. Our portfolio of Laser Rangefinder module includes high accuracy, high precision, and short Distance Measurement Sensors(from 3cm starting measuring) that are also available with Arduino communication. Find the right solution for your application. Or watch the video to learn how the Laser Distance RS232 working with your computer, or you can install it on your Robotics products.
Application of our Laser Distance Sensor
Key parameters: Simple, fast, long, precise
Test interface: usb/rs232/rs485
Accuracy: +-1mm
Measuring time: 0.125s-4s
Size: 45*25*12mm
30m Long Distance Sensor Size
Detailed parameters
| Model Number | 703A |
| Measuring time | 0.125s-4s
|
| Place of Origin | China |
| Accuracy | ±1 mm |
| Measuring Unit | mm |
| Applications | support connect to your Arduino/Raspberry Pi etc. |
| Measuring Range | 0.03-30m |
| Laser Class | Class II |
| Laser Type | 620nm-690nm, <> |
| Size | 45*25*12mm |
| Weight | About 10g |
| Voltage | DC2.0~3.3V |
| Electrical Level | TTL/CMOS |
| Frequency | 3 Hz ~8Hz |
| Operating Temperature | 0-40 ℃ (32-104 ℉ ) |
| Storage Temperature | -25~60 ℃ (-13~140 ℉) |
| Packaging | Neutro-packing |
Notes:
1. Under bad measure condition, like environment with strong light or the diffuse reflectance of measuring point over-high or low, the accuracy would have bigger amount of error: ±1 mm+40PPM.
2. Under strong light or bad diffuse reflectance of target, please use a reflector.
3. Voltage can be changed by power converter LDO
4. Frequency would be affected by environment.
5. Operating temperature -10 ℃~50 ℃ can be customized.
6. Analog can be customized.
More Detailed Pictures:
Diagram for the Laser Distance sensor:
How to use your module to test?
There is a simple steps for you:
1. install the Gese software and USB driver on your computer.
2. Then you can send the related command to test
Basic Commands Demonstration
"O": switch on the laser;
"C": switch off the laser command
"S": get module status;
"V": get module version information;
"D": automatic measurement;
"M": slow measurement;
"F": quick measurement.
Continuous Measurement
Continuous measurement can be used on all measurement modes: auto measurement, slowmeasurement and fast measurement.
1. Enter continuous measurement: after pulling the control pin P13.nCTRL lower, enter D or M or F, the module will start measuring, the measuring speed is according to the command you just entered.
2. Exit continuous module: Pull the control pin P13.nCTRL higher when the module is continuous measuring, the continuous measurement mode stop immediately.
JRT is participating in the Russian International Hardware Show, welcome to our booth.
Time: November 5-8, 2019
Location: Ruby Pavilion PAV.8.1 & 8.2.
Our Booth No.: HALL8.1 D2104
Chengdu JRT Main Ranging Modules: Laser Distance Meter module, Industrial Laser Distance Sensor, mini TOF ranging sensor.
Looking for ideal Arduino Range Sensor Manufacturer & supplier ? We have a wide selection at good prices to help you get creative. All the Range Sensor in Robotics are quality guaranteed. We are China Origin Factory of 30m Arduino Range Sensor Robotics. If you have any question, please feel free to contact us.