MFJ1dryelectromagnetforvalveseriescommunicationMFJ1dryelectromagnetforvalveseriescommunicationuseThisseriesofelectromagnetappliesac50hz/60hz
MFJ1 dry electromagnet for valve series communication
MFJ1 dry electromagnet for valve series communication
use
This series of electromagnet applies ac 50 hz / 60 hz, 380 v voltage control circuit, as mechanical equipment and automation system of manipulator plundering remote control and mechanical braking power components, the product conforms to standard JB/T10162-1999 performance requirements.
Normal working conditions
Install where no significant shake and shock vibration.
Use environment should have no enough to corrosive action on metals, and damage the insulation gas and dust. Otherwise, that may affect product life.
Electromagnet applies to the following work: intermittent duty for a long time, short work again and again.
Reasonable power supply voltage fluctuation range of 85% to 85% (special request when ordering) is put forward.
The main technical parameters
型号 | 额定电压(V) | 额定频率(Hz) | 额定吸力(N) | 额定行程(mm) | 全行程(mm) | 起动伏安(VA) | 吸特伏安(VA) | 操作频率(T/h) |
MFJ1-3 | 110/127/220/380 | 50 | ≥30 | 7 | ≥7.5 | ≤420 | ≤85 | 2000 |
MFJ1-4.5 | 110/127/220/380 | 50 | ≥45 | 8 | ≥8.5 | ≤660 | ≤110 | 2000 |
MFJ1-5.5 | 110/127/220/380 | 50 | ≥55 | 8 | ≥8.8 | ≤660 | ≤110 | 2000 |
MFJ1-7 | 110/127/220/380 | 50 | ≥70 | 7 | ≥10 | ≤770 | ≤160 | 2000 |
H-4.5 | 110/127/220/380 | 50 | ≥45 | 8 | ≥8.5 | ≤660 | ≤110 | 2000 |
订货代号
阀用电磁铁 | 交流 | 设计序号 | 额定吸力(Kgf) |
MF | J | 1 | 3/4.5/5.5/7 |
外形及安装尺寸
型号 | 外形尺寸 | 安装尺寸 |
A max | B max | H max | C | D | h | d | d1 | K |
MFJ1-3 | 61 | 61 | 90 | 50±0.2 | 50±0.2 | 12±0.2 | φ4.5 | >φ9 | 22.5 |
MFJ1-4.5 | 71 | 71 | 105 | 60±0.2 | 60±0.2 | 13±0.2 | φ5.5 | >φ9 | 22.5 |
MFJ1-5.5 | 71 | 71 | 105 | 60±0.2 | 60±0.2 | 13±0.2 | φ5.5 | >φ9 | 22.5 |
MFJ1-7 | 81 | 81 | 124 | 68±0.2 | 68±0.2 | 18±0.2 | φ6.5 | >φ10 | 30 |
H-4.5 | 71 | 80.5 | 97 | 58.5±0.2 | 68±0.2 | 14+0.20 | φ6 | >φ9 | 27 |
Samples show
When new use solenoid, nominal schedule shall not be more than half of the whole journey, must ensure that no two electromagnets electricity at the same time, to avoid electromagnetic abnormal burned.
When electromagnets use for a long time, the product, abnormal noise or not closed, with detachable electromagnet, the magnetic yoke polar surface oil and dirt removed, so as not to burn the electromagnet coil.
Main characteristic parameters are the laboratory conditions, the company reserve the right to modify the parameters.