Welcome Customer !

Membership

Yueqing ZHENGYONG co., LTD.
Free Member ·1YRS
,
Other

Main Products: 电磁铁

Xwboo>Products

Yueqing ZHENGYONG co., LTD.Free·1YRS

  • E-mail

    info@cn-zye.com

  • Phone

    +86-577-61761217

  • Address

    Yueqing city, zhejiang province, liu town openmindedness bottom village

Contact Now

MFJ9 -yc series dc wet-type electromagnet for valve

Model
Nature of the Manufacturer
Other
Product Category
Framework of electromagnet
Place of Origin
City, Province
Overview
Product Details

MFJ9 -yc series dc wet-type electromagnet for valve

MFJ9 -yc series dc wet-type electromagnet for valve
use
This series of electromagnet applies to the control circuit of the voltage to 220 v. As the power of hydraulic solenoid directional valve components. 6, 10 diameter screw coupling electromagnetic directional valve.

Normal working conditions
Can be installed in any direction.
Use environment should have no enough to corrosive action on metals, and damage the insulation gas and dust. Otherwise, that may affect product life.
Electromagnet for duty, duty cycle for a long time.
Reasonable power supply voltage fluctuation range of 85% to 85% (special request when ordering) is put forward.
Enclosure protection grade reaches IP65.

The main technical parameters

型号
额定电压(V)
额定吸力(N)
额定行程(mm)
全行程(mm)
消耗功率(W)
承受静态油压(MPa)
操作频率(T/h)
MFZ9A-20YC
12/24/100/220
≥20
3
≥6
≤28
16
12000
MFZ9A-55YC
12/24/100/220
≥55
4
≥8
≤38
16
12000

订货代号
阀用电磁铁
直流
设计序号
额定吸力(Kgf)
湿式
MF
Z
9A
22/55
YC

行程-力特性曲线

外形及安装尺寸

Using the matters needing attention
Electromagnet used ISO4400 standard socket. A with light and without light two specifications, you can choose according to need. With a lamp socket voltage specifications must be consistent with electromagnet ontology voltage specifications.
Electromagnet push rod is used to manually in debugging or in an emergency, manual control. But when the system back pressure is higher, adjustment difficulties, please use the phillips screwdriver slowly push manual push rod, unfavorable use impact, so as not to damage the manual push rod and guide inner hole surface, electromagnet leak or position.
When two-way use electromagnet, must ensure that no two electromagnets electricity at the same time, in order to avoid the electromagnetic valve can't work normally.
Electric control system and the electromagnet connection between parts should have over-current protection device, in order to avoid abnormal cases, burning electromagnet and your electronic components.

Samples show
If customers have different needs, on the basis of the electromagnetic properties, the electromagnet and the valve size of connection, the valve stem into length and the working power supply voltage can be adjusted according to the requirements.
Characteristic curves are for reference only.
Main characteristic parameters are the laboratory conditions, the company reserve the right to modify the parameters.