MFJ9 -yc series dc (wiring box) wet-type electromagnet for valve
MFJ9 -yc series dc (wiring box) wet-type electromagnet for valve
use
This series of electromagnet applies ac 50 hz / 60 hz voltage to 240 v control circuits. As the power of hydraulic solenoid directional valve components. Can form a complete set of Japanese type oil research (YUKEN) 6, 10 diameter wiring box thread coupling electromagnetic directional valve.
Normal working conditions
Can be installed in any direction.
Use environment should have no enough to corrosive action on metals, and damage the insulation gas and dust. Otherwise, that may affect product life.
Electromagnet for duty, duty cycle for a long time.
Reasonable power supply voltage fluctuation range of 85% to 85% (special request when ordering) is put forward.
Enclosure protection grade reaches IP65.
The main technical parameters
型号 | 额定电压(V) | 额定频率Hz | 额定吸力(N) | 额定行程(mm) | 全行程(mm) | 承受静态油压(MPa) | 起动伏安 VA | 吸特伏安VA | 操作频率(T/h) |
MFJ9-26YC | 110/220 220/240 | 50/60 | ≥26 | 3 | ≥6 | 16 | ≤188 | ≤60 | 12000 |
100 200 | 60 |
MFJ9-50YC | 110/220 220/240 | 50/60 | ≥50 | 4 | ≥8 | 16 | ≤336 | ≤84 | 12000 |
100 200 | 60 |
The order code阀用电磁铁 | 交流 | 设计序号 | 额定吸力(Kgf) | 湿式 |
MF | J | 9 | 26/50 | YC |
Stroke - force characteristic curve
Appearance and installation dimensions
Using the matters needing attention
Electromagnet used ISO4400 standard socket. A with light and without light two specifications, you can choose according to need. With a lamp socket voltage specifications must be consistent with electromagnet ontology voltage specifications.
Electromagnet push rod is used to manually in debugging or in an emergency, manual control. But when the system back pressure is higher, adjustment difficulties, please use the phillips screwdriver slowly push manual push rod, unfavorable use impact, so as not to damage the manual push rod and guide inner hole surface, electromagnet leak or position.
When two-way use electromagnet, must ensure that no two electromagnets electricity at the same time, in order to avoid the electromagnetic valve can't work normally.
Electric control system and the electromagnet connection between parts should have over-current protection device, in order to avoid abnormal cases, burning electromagnet and your electronic components.
Samples show
If customers have different needs, on the basis of the electromagnetic properties, the electromagnet and the valve size of connection, the valve stem into length and the working power supply voltage can be adjusted according to the requirements.
Characteristic curves are for reference only.
Main characteristic parameters are the laboratory conditions, the company reserve the right to modify the parameters.