Mold temperature machine media failure refers to lack of media (water or oil).
Oil temperature controller, please check whether the liquid level in the lower oil tank is normal. If it is not normal, just add heat-conducting oil to the fuel tank; if it is normal, you can first check whether the float level switch is stuck, screw it out and take a look. If the above problems are eliminated, you need to check whether there is any problem with the control panel of the mold temperature machine.
1.Perfect safety protection, fault display, repair, maintenance without professional personnel
2.304 stainless steel integrated pipeline
3.Heater Selector Switch (Automatic)
4.Heater Selector Switch (Manual)
5.High-Temperature Stainless Steel Braided Hose
6.Leak Containment Cabinetry
7.Control Options - remote set point and re-transmission, communication ports, and much more
8.Heat Exchanger Flow Control System
9.Other Voltages, Phases, Frequencies
10.Overhead Piping Kit
11.Phase Indicator
12.Process Fluid Purge via Switch