Welcome Customer !

Membership

Kassel Machinery (Zhejiang) Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 水果切割机

Xwboo>Products

Standard Oil Temperature Control Unit Machine

Model
Nature of the Manufacturer
Other
Product Category
Oil Temperature Control Unit
Place of Origin
City, Province
Overview
Standard Oil Temperature Control Unit Machine
Product Details

Features:

1.Perfect safety protection, fault display, repair, maintenance without professional personnel

2.304 stainless steel integrated pipeline

3.Heater Selector Switch (Automatic)

4.Heater Selector Switch (Manual)

5.High-Temperature Stainless Steel Braided Hose

6.Leak Containment Cabinetry

7.Control Options - remote set point and re-transmission, communication ports, and much more

8.Heat Exchanger Flow Control System

9.Other Voltages, Phases, Frequencies

10.Overhead Piping Kit

11.Phase Indicator

12.Process Fluid Purge via Switch


The reasons why the oil temperature machine cannot heat up normally are as follows

1. If the heating tube is defective or damaged, the oil temperature machine cannot be heated, so the temperature cannot be reached;

2. The abnormality of the thermostat causes the abnormal display of the temperature of the heating oil temperature machine;

3. The pipeline of the machine is too long, the head and pressure of the circulating pump cannot meet the requirements, and the heat generated by the heating of the oil temperature machine cannot raise the temperature of the heated object;


Features:

1.Perfect safety protection, fault display, repair, maintenance without professional personnel

2.304 stainless steel integrated pipeline

3.Heater Selector Switch (Automatic)

4.Heater Selector Switch (Manual)

5.High-Temperature Stainless Steel Braided Hose

6.Leak Containment Cabinetry

7.Control Options - remote set point and re-transmission, communication ports, and much more

8.Heat Exchanger Flow Control System

9.Other Voltages, Phases, Frequencies

10.Overhead Piping Kit

11.Phase Indicator

12.Process Fluid Purge via Switch





Mold temperature machine media failure refers to lack of media (water or oil).

Oil temperature controller, please check whether the liquid level in the lower oil tank is normal. If it is not normal, just add heat-conducting oil to the fuel tank; if it is normal, you can first check whether the float level switch is stuck, screw it out and take a look. If the above problems are eliminated, you need to check whether there is any problem with the control panel of the mold temperature machine.

Product Categories : Temperature Control Unit TCU > Oil Temperature Control UnitFeatures:

1.Perfect safety protection, fault display, repair, maintenance without professional personnel

2.304 stainless steel integrated pipeline

3.Heater Selector Switch (Automatic)

4.Heater Selector Switch (Manual)

5.High-Temperature Stainless Steel Braided Hose

6.Leak Containment Cabinetry

7.Control Options - remote set point and re-transmission, communication ports, and much more

8.Heat Exchanger Flow Control System

9.Other Voltages, Phases, Frequencies

10.Overhead Piping Kit

11.Phase Indicator

12.Process Fluid Purge via Switch









Product Categories : Temperature Control Unit TCU > Oil Temperature Control Unit

Similar Product Recommend