Because Freeze Dryer equipment has many advantages that other traditional drying processes cannot achieve, enterprise transformation or investment in Vacuum Freeze Dryer equipment production lines will become a trend in future development. Commercial freeze-drying equipment is used for freeze-drying processing and production of various materials. Many engineers of freeze-drying machine processing companies are unclear about the operation. Here is a brief introduction for how to use commercial freeze-drying equipment.
1. Check the machine before starting:
1) Check the pressure gauge of the compressor unit of the freeze dryer equipment to determine whether the compressor oil is normal;
2) Check whether the vacuum pump oil is normal;
3) Check whether the cooling water is normal;
4) Check whether the medium oil is normal;
5) Check whether the power supply is normal;
6) Check whether the compressed air is used normally;
2. Start-up;
1) Turn on the main switch of the electric control power supply of the freeze dryer and start the computer control system;
2) Set the freeze-drying process data;
3) Confirm that the data is correct, and confirm the feeding situation of freeze-dried materials;
4) Determine whether the chamber door and valve are closed;
5) Start the freeze dryer equipment;
6) Run the freeze dryer, and check whether the system and process data are running normally;
7) Do the judgment test for the end of freeze-drying of materials;
8) Judging that the end point of the material freeze-drying is over, end the operation;
9) Open the intake valve and input clean air;
10) After the pressure inside and outside the freeze-drying chamber is balanced, open the chamber door to discharge the material.
3. Treatment after freeze-drying:
1) After discharging, defrost the condenser;
2) Make sure the defrosting is complete;
3) Drain the defrost water, and check whether there is ice blockage and whether the drainage is complete;
4) Clean the partition and material tray;
5) Prepare for the next batch of material.