[Machine structure]
The whole aircraft is mainly composed of three parts:
(1) Transmission part
The eccentric disc is driven by a motor through a precision gearbox. The other end of the connecting rod on the disc is connected with the sliding base of the friction part. Therefore, when the eccentric disc rotates, the friction part is driven to reciprocate.
Reciprocating speed can be adjusted arbitrarily by touch screen.
(2) Friction part
The friction part consists of an upper friction plate rack and a lower friction plate rack. The upper friction rack is equipped with six friction plates, and the lower friction rack is equipped with five friction plates. The friction plates are made of high quality steel after heat treatment and quenching. There is a certain weight requirement for the upper friction disc rack to enable the sample wires to buckle through under tension load. When running in reciprocating mode, the sample wires will buckle and friction between the upper and lower staggered friction discs.
(3) Tension part:
The sample wires are hooked back and forth from left to right on the hook. There are nine hooks on the left and ten on the right. Finally, the sample wires are pressed under the knurling nuts, and a total of 20 sample wires are wound.
In order to ensure proper tension on the sample silk, a certain weight weight is hung in the ring at the end of the chain.
[Counting part]:
A photoelectric switch is used to count the number of reciprocating pairs through eccentric disc and coaxial light shield, which is displayed by touch screen.