Welcome Customer !

Membership

Shanghai Jifa Instrument Equipment Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 检测仪器

Xwboo>Products

Shanghai Jifa Instrument Equipment Co., Ltd.Free·1YRS

  • E-mail

    jifayiqi@163.com

  • Phone

    021-52275598

  • Address

    2/F, Building 3, No. 3599, Yuanjiang Road, Minhang District, Shanghai

Contact Now

JF-550GB-II type national standard bag abrasion testing machine

Model
Nature of the Manufacturer
Other
Product Category
Luggage And Footwear Equipment
Place of Origin
City, Province
Overview
The test method is directed to testing the trolley case with the wheel and the travel bag with the tie rod to
Product Details

The test method is directed to testing the trolley case with the wheel and the travel bag with the tie rod to carry out certain wear and shock resistance of the walking wheel and the overall structure of the box for damage and deformation (including the bag at the same time). The bottom four wheels are tested).

Meet QB/T 2920-2018 3.1 Test method for luggage walking conditions A method (roller type) Standard requirements.

1 Test speed: 0-5±0.1km/h digital adjustment

2 Auxiliary function: The laser sensor will stop automatically when the test piece is dropped in the middle.

3 lever angle adjustment: 45 ° ± 2 ° (angle 20 degrees - 60 degrees can be freely adjusted), equipped with a digital display

4 load weight: up to 50kg.

5 Roller speed: (98±2)r/min, the two rollers rotate relative to each other.

6 Cement wheel diameter: (216±2)mm, length not less than 600mm, formula is sand (medium sand): cement (42.5, P.0)=3:2, smooth surface, uniform material, no cracks, no unevenness Pit scar

7 Fixing fixture: It has two rounds of 45-degree diagonal pull and four-wheel horizontal test. At the same time, it can clamp 16-35 inch luggage. It can't loosen and destroy the sample during the test.

8 control mode: PLC programmable device control 7-inch touch color display display, with digital adjustment speed, display speed and stop-time interval free control.

9 steel impact block size: a raised steel bar on the wheel surface, width 30mm, thickness 3mm, chamfer 0.5mm

10 two cement drum moving distance: minimum 50MM maximum 300MM. Manual hand wheel adjustment distance


Similar Product Recommend