[Box structure]
1. The box body is made of NC equipment, advanced technology, smooth lines and elegant appearance.
2. The outer shell of the box is sprayed with 1.2mm thick cold-rolled steel plate; the inner liner is SUS304 high-grade stainless steel plate and the lid of the box
3. Spray treatment for SUS304 stainless steel.
4. The air duct in the box adopts a single-cycle system with an imported axial-flow fan, which improves the air flow rate, heating capacity and greatly improves the performance.
Temperature Uniformity of Test Box
5. Lamp tube: imported ultraviolet lamp tube, 8 in two rows, 40W/lamp
6. Lighting tube life: 5000h
7. Water source and consumption: 8 litres of clean or distilled water per day
[Control system]
1. Adopt the German "Siemens" PLC controller and Taiwan Footwear Color Touch Screen Display.
2. Temperature control adopts P. I. D + S. S. R. The coordinated control of the system with the same channel can improve the stability and service life of the control elements and interfaces.
3. Light, condensation and spraying can be controlled independently or alternately.
4. Input mode: Pt100 sensor
[Sprinkler system]
1. Spraying uniformity regulation: By using the manual control function of the controller, the spraying condition can be observed in the open state, and the spraying head can be adjusted or replaced.
2. Spray state monitoring: the machine is equipped with a spray device, which simulates the sudden change of temperature and rain erosion when it rains. There are several nozzles in total, and the spray is even. Whenever spraying and how long it lasts are freely set by customers.
3. The equipment has its own water filtering device and its pressure pumping device to facilitate the normal use of customers.
[Safety Protection System]
1. Leakage protection
2. Overload Power-off Protection
3. Overtemperature protection
4. Voice Alarm
5. Water shortage and grounding protection
[Equipment use environment]
1. Power supply: AC380 (+10%) V/50HZ three-phase four-wire system
2. Environment: 20-30 degrees Celsius (recommended by ASTMG53), <80% RH, good ventilation, clean indoor environment.