NO | ITEM | TEST METHOD | SPECIFICATION |
| 1 | Tensile strength (IEC 60794-1-E1) | - Load: 4500 N- Mandrel dia.: ≤30xcable outer diameter(According to EIA-455-33A) - Length & Time: 100m & 1 hour | - Loss change (after test) ≤ 0.1 dB- No fiber break- No sheath damage |
| 2 | Crush test(IEC 60794-1-E3) | - Load: 1000 N- Length: 100 mm- Steel plate: according to EIA-455-41A - Time: 10 minutes | - Loss change: ≤ 0.1 dB- No fiber break- No sheath damage |
| 3 | Impact test (IEC 60794-1-E4) | - Number of impacts: 20 (Different point)- Impact energy: according to EIA-455-25B- Impact height: 15 cm - Radius of hammer head: 12.5mm - Impact rate: 2 sec./cycle | - Loss change ≤ 0.1 dB- No fiber break - No sheath damage |
| 4 | Repeated bending(IEC 60794-1-E6) | Bending dia.: 20 x cable outer diameter- Load: comply with EIA-455-104A specification According to cable diameter- Flexing rate: 2 sec./cycle - No. of cycle: 25 | - Loss change: ≤ 0.1 dB-No fiber break -No sheath damage |
| 5 | Twist / Torsion (IEC 60794-1-E7) | - Length: 1m- Load: comply with EIA-455-85A specification According to cable diameter- Twist rate: 1min./cycle - Twist angle: ±180° - No. of cycle: 10 | - Loss change:≤ 0.1 dB - No fiber break - No sheath damage |
| 6 | Bending test (IEC60794-1-E11) | - Mandrel dia.: 20xOD- No. of cycle: 5 | - Loss change:< 0.1 dB- No fiber break- No sheath damage |
| 7 | Compound Flow (IEC60794-1-E14) | - Sample length: 30 cm- Temp: 70°C ± 2°C- Time: 24 hours | - Weight decrease≤0.005g |
| 8 | Temperature Cycling(IEC 60794-1-F1) | - Temperature step:+20℃ → -10℃ → +70℃ → +20℃- Number of cycle: 2 - Time per each step: 24 hrs | - Loss change:< 0.1 dB/km- No fiber break- No sheath damage |
| 9 | Water penetration (IEC60794-1-F5B) | - Height of water: 1m- Sample length: 3 m- Time: 1 hour | -At the end of 1 hour period,No water shall have leaked fromthe opposite end of the cable (No drip under inner acket, Drip between inner and outer Jacket ) |
10 | Low or HighTemp. Bend Test (EIA/TIA-455-37A) | - Temperature: -10°C to + 70°C- Mandrel dia.: 20xOD | - Loss change < 0.1 dB |