Welcome Customer !

Membership

Shanghai Minggong Heavy Equipment Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 矿山机械

Xwboo>Products

Shanghai Minggong Heavy Equipment Co., Ltd.Free·1YRS

  • E-mail

    Sales7@jxjq.com

  • Phone

  • Address

    No. 299 Shenzhou Road, Fengxian District, Shanghai, China

Contact Now

Bucket Elevtor

Model
Nature of the Manufacturer
Other
Product Category
Building Material Equipment
Place of Origin
City, Province
Overview
Steel wire belt elevator is an important device used for vertically conveying the particular materials. And it is characterized by large conveying volume, high lifting height, stable running, easy operation and maintenance and long service life, etc.
Product Details

Introduction

Steel wire belt elevator is an important device used for vertically conveying the particular materials. And it is characterized by large conveying volume, high lifting height, stable running, easy operation and maintenance and long service life, etc. Besides it is widely used in transportation system of building construction, chemical industry,, mining, power station and port transportation, etc. And it is suitable for conveying various powders, granular and block materials with the temperature below 150℃.


Features And Benefits

1. High elevated height, can reach 100m.

2. Wide elevated range, can convey powders, granular and small block materials with characters of dry, loose and good liquidity, or even the powder with drawbacks of wet, easy to agglomerate, and bad liquidity. It adopts heat-resisting belt, can applies to elevate the materials with the temperature below 150℃.

3. Absorb advantages of TH and NE series, and adopt inflow and dig loading, centrifugal or mixing unloading methods, the hopper applies SH and ZH model ,and the capacity can reach 500m/h.

4. Automatic steady and tension setting, special anti-deviating device and belt lacing techniques, the roller adopts outsourcing glue structure, little vibration and fine sealing performance, it is a reliable green products.

5. Long service life and reliable operation with advanced design theory and the dragging parts with high-insensitive steel wire belt ensure it run high effectively in a long time.

6. Small power and little consumption Simple maintenance, few wearing parts, compared with the general elevator. it saving power 30%. reduce the repairing cost above 80%.


Working Principle

The Bucket Elevator is used for coveying the material from lower level to higher Level in the plant. The material entering at the bottom inlet is carried to the top by The bucket and discharged centrifugally in the outlet of the elevator.It consists of A rubber belt fitted with buckets at required intervals vertically and top and Bottom pulley inside a fabricated steel casing.(troughs).Sliding bearings are Incorporated in the bottom pulley so that the tightness of the belt may be adjusted The top pullay is rubberised to provide drive without any slip. Pawl and- ratchet type back stop is provided on the top pullay to prevent Reverse rotation due to the weight of the material on the active side of the belt. Bucket elevators are driven by a chain drive provided at the top through motor or a worm reduction gear drive.


Main Technical Parameters

Model

Capacity
(m/h)

Hopper

Weight
(kg/m)

Running speed
(m/s)

Height
(m)

Volume(L)

Hopper distance (mm)

TDG160

32

2.6

260

22

1.2

80

TDG200

45

4.1

300

21.5

1.2

80

TDG250

72

6.5

325

33

1.34

80

TDG315

101

10

360

33.2

1.5

80

TDG400

158

16

420

42.2

1.5

80

TDG500

220

25

460

62.3

1.5

80

TDG630

348

40

520

78.53

1.68

80

TDG800

492

64

580

106

1.65

80

TDG1000

788

102

650

145

1.86

80

TDG1250

1220

161

720

155.5

1.86

80

TDG1600

1541

255

820

223

1.86

80


HL series of chain bucket elevator is a type of ring chain, which adopts the model of centrifugal unloading and dig-loading. And its traction mechanism is two circular chains. In our company, this series is suitable for vertical conveying of the materials with the bulk density less than1.5 t/m³, the powdery and granular materials are easy to dig, and the small lump materials have low abrasiveness, like coal, cement, gravel, sand, chemical fertilizer, and grains, etc. Besides, it can convey the materials with the temperature below 250℃.


Features of Bucket Elevator

• Obvious features like low power required, effective inflow feeding & guiding discharge.

• It has vast range of application with almost no limitation for lifting material forms and properties. Materials like power, grain or big lump could be all applicable. Also its good sealing condition could effectively reduces the environmental pollution.

• Excellent running reliability. Advanced design and processing method ensure the running reliability of the complete machine.

• Long service life. The design of this machine ensures that the materials is seldom scattered while feeding and discharging, which reduces the mechanical wearing.


Working Principle

• Material is fed into an inlet hopper. Buckets dig into the material, and convey it up to and over the head sprocket/pulley, then throwing the material out the discharge throat.

• The emptied buckets then continue back down to the boot to continue the cycle.


Model

HL250

HL315

HL400

HL500

HL630

Hopper type

ZH

SH

ZH

SH

ZH

ZH

SH

ZH

SH

ZH

Capacity (m³/h)

31.43

48.19

35

59

58

94

73

118

114

185

Hooper

Volume (L)

3.0

4.6

3.75

6

5.9

9.5

9.3

15

14.6

23.6

Distance (mm)

500

512

688

Chain

Steel rod diameter*pitch (mm)

Φ14×15

Φ18×64

Φ22×86

Fracture strength of single-chain (KN)

≥190

≥320

≥480

Traction weight in unit length (kg/m)

21

23

25.64

26.58

31.0

31.9

41.5

44.2

49.0

52.3

Speed of driving chain wheel (r/min)

44.11

42.5

37.6

35.8

31.8

Max size of material(mm)

30

35

40

50

60

Similar Product Recommend