Product Description
25G SFP28 transceivers, This 850 nm VCSEL 25Gigabit SFP28 transceiver is designed to transmit and receive optical data over 50μm multimode optical fiber OM3 70m and OM4 100m.
The SFP28 SR module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector.
Product Features
25Gb/s serial optical interface
850nm VCSEL transmitter, PIN photo-detector
2-wire interface for management specifications compliant with SFF8472 DDM interface for optical transceivers
Operating case temperature: 0 to 70℃
All-metal housing for superior EMI performance
Low power consumption
Advanced firmware allow customer system encryption information to be stored in transceiver
Cost effective SFP28 solution, enables higher port densities and greater bandwidth
RoHS compliant
APPLICATIONS
High-speed storage area networks
Computer cluster cross-connect
Custom high-speed data pipes
- Product Specification -
Parameter
Package (Form Factor) SFP28
Data Rate (typical) 25.78Gb/s
Centre Wavelength 850nm
Distance 100m
Diagnostics Digital Monitor
Transmitter DFB Laser
Receiver PIN photo detector
TX Output Power (dBm) -8.4~+2.4
RX Sensitivity (dBm) -10.3
Low/High Case Temperature 0°C~70°C
Voltage Supply (typical) 3.3v
Connector Duplex LC
Ordering Information
|
| Type | Rate | Wavelength | Transmission distance | Transitter Power | Receiver Sensitivity | Temperature Range | Interface |
| 25G QSFP | 25Gb/s | 850nm | 100m | -8.4~2.4dB | ≤-10.3dBm | VCSEL | LC |
| 1310nm | 10km | -6.5~2dB | ≤-11.3dBm | DFB | LC
|