Description
The SFP transceivers are high performance,cost effective modules supporting multi-rate of 10Gbps and 40km transmission distance with SMF.Thetransceiver consists of three sections:a FP laser transmitter,a PIN photodiode integrated with a trans-impedance preamplifier(TIA)and MCU control unit.All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement(MSA)and SFF-8472.For further information,please refer to SFP MSA.
Features
Up to 10.7Gbps Data Links
1.Single Mode LC Receptacle Bi-directional Transceiver
2.Up to 40km transmission on SMF
3.Power dissipation<1.5W
4.1270nm DFB laser and APD receiver
5.2-wire interface with integrated Digital Diagnostic monitoring
6.EEPROM with Serial ID Functionality
7.Compliant with SFP+MSA with duplex LC connector
8.Single+3.3V Power Supply
9.Case operating temperature:-5?C~+70?C
Applications
Gigabit Ethernet
Fiber Channel
WDM Application
Switch to Switch interface
Switch backplane applications
ATM
SONT/SDH/PDH
FDDI
Other optical transmission system
- Product Specification -
Table 1-Optical and Electrical Characteristics
Parameter | Symbol |
Transmitter |
| Min | Typical | Max | Unit | Notes |
Centre Wavelength | λc | 1260 | 1310 | 1360 | nm |
|
Spectral Width(RMS) | λ |
|
| 4 | nm |
|
Average Output Power | Pout | -9 |
| -3 | dBm | 1 |
Extinction Ratio | ER | 9 |
|
| dB |
|
Optical Rise/Fall Time(20%~80%) | tr/tf |
|
| 0.26 | ns |
|
Data Input Swing Differential | VIN | 400 |
| 1800 | mV | 2 |
Input Differential Impedance | ZIN | 90 | 100 | 110 | Ω |
|
TX Disable | Disable |
| 2 |
| Vcc | V |
|
Enable |
| 0 |
| 0.8 | V |
|
TX Fault | Fault |
| 2 |
| Vcc | V |
|
Normal |
| 0 |
| 0.8 | V |
|
Receiver |
Centre Wavelength | λc | 1260 |
| 1580 | nm |
|
Receiver Sensitivity |
|
|
| -23 | dBm | 3 |
Receiver Overload |
| -3 |
|
| dBm | 3 |
LOS De-Assert | LOSD |
|
| -24 | dBm |
|
LOS Assert | LOSA | -35 |
|
| dBm |
|
LOS Hysteresis |
| 1 |
| 4 | dB |
|
Data Output Swing Differential | Vout | 400 |
| 1800 | mV | 4 |
LOS | High | 2 |
| Vcc | V |
|
Low |
|
| 0.8 | V |
|
NOTE:
1.The optical power is launched into SMF.
2.PECL input,internally AC-coupled and terminated.
3.Measured with a PRBS 27-1 test pattern@1250Mbps,BER ≤1×10-12.
4.Internally AC-coupled.
Ordering information
| Modle | Rate | Wavelength | Transmission Distance | Tx Power | Rx Power | Connector |
| XYT-SFP+BX-U/D | 10Gb/s | 1270/1330 | 10km | -1~-5 | ≤-15 | LC |
| XYT-SFP+BX-U/D | 10Gb/s | 1270/1330 | 40km | 0~5 | ≤-16 | LC |
| XYT-SFP+BX-U/D | 10Gb/s | 1270/1330 | 60km | 0~5 | ≤-20 | LC |