Description
10Gb/s 850nm Multimode XFP Optical Transceiver multi-rate 10G XFP transceiver is designed for serial optical data communications such as 10G Fiber Channel.It supports the 8.5Gbps transmission on both 50/125 mm and 62.5/125 mm MMF.The transceiver consists of two sections:The transmitter section consists of adirectly modulated 850nm VCSEL,driver and signal conditioner.The receiver section incorporates a PIN photodiode integrated with a trans-impedance preamplifier(TIA)and signal conditioner.Digital diagnostics functions are available via a 2-wire serial interface,as specified in the XFP MSA.
Features
1.Up to 10 Gb/s Data Link
2.Complaint to XFP MSA
3.Compliant with FC-Pi-4 800-M5/M6/M5E-LC-I
4.Maximum link length of 300m MMF
5.2-Wire Interface for Integrated Digital Diagnostic Monitoring
6.XFI and Line side Loopback Mode
7.No reference clock required
8.Low Power Dissipation<1.5W
9.RoHS Compliant
10.Case Temperature range :-5°C to 70°C
11.Duplex LC Connector
Applications
1.10GBASE-ZR/ZW 10G Ethernet
2.80KM 10G Fiber Channel
3.SONET OC-192&SDH STM 64
- Product Specification -
Table 1-Optical and Electrical Characteristics
Parameter | Symbol | Min | Typical | Max | Unit | Notes |
Transmitter |
Centre Wavelength | λc | 1260 | 1310 | 1360 | nm |
|
Spectral Width(RMS) | ?λ |
|
| 4 | nm |
|
Average Output Power | Pout | -9 |
| -3 | dBm | 1 |
Extinction Ratio | ER | 9 |
|
| dB |
|
Optical Rise/Fall Time(20%~80%) | tr/tf |
|
| 0.26 | ns |
|
Data Input Swing Differential | VIN | 400 |
| 1800 | mV | 2 |
Input Differential Impedance | ZIN | 90 | 100 | 110 | Ω |
|
TX Disable | Disable |
| 2 |
| Vcc | V |
|
Enable |
| 0 |
| 0.8 | V |
|
TX Fault | Fault |
| 2 |
| Vcc | V |
|
Normal |
| 0 |
| 0.8 | V |
|
Receiver |
Centre Wavelength | λc | 1260 |
| 1580 | nm |
|
Receiver Sensitivity |
|
|
| -23 | dBm | 3 |
Receiver Overload |
| -3 |
|
| dBm | 3 |
LOS De-Assert | LOSD |
|
| -24 | dBm |
|
LOS Assert | LOSA | -35 |
|
| dBm |
|
LOS Hysteresis |
| 1 |
| 4 | dB |
|
Data Output Swing Differential | Vout | 400 |
| 1800 | mV | 4 |
LOS | High | 2 |
| Vcc | V |
|
Low |
|
| 0.8 | V |
|
NOTE:
1.The optical power is launched into SMF.
2.PECL input,internally AC-coupled and terminated.
3.Measured with a PRBS 27-1 test pattern@1250Mbps,BER ≤1×10-12.
4.Internally AC-coupled.
Ordering information
Type | Rate | Wavelength | Transmission Distance | Transmitter Power | Receiver sensitivity | Receiver sensitivity | Operating temperature |
SFP+ | 10G | 850nm | 300M | -1~-5 | ≤-12 | LC | 0-70℃ |
| 10G | 1310nm | 2KM | -1~-6 | ≤-14.4 | LC | 0-70℃ |
| 10G | 1310nm | 10KM | -1~-6 | ≤-14.4 | LC | 0-70℃ |
| 10G | 1550nm | 40KM | -1~-3 | ≤-15.8 | LC | 0-70℃ |
| 10G | 1550nm | 80KM | 0~-4 | ≤-23 | LC | 0-70℃ |