SA30 single direct slide potentiometer

SA30 single direct slide potentiometer product introduction

Potentiometer Model: SA3005NJA0X-HA1

SA30 single-slide straight potentiometer features: stable performance, good hａnd feeling, can be wave soldered, push handle can be LED, the product can be positioned with midpoint. There are a wide variety of products to choose from to meet a variety of needs.

SA30 single direct slide potentiometer application: mixer, keyboard, guitar, etc.

Main functions: adjust volume, adjust tone, adjust balance, etc.

SA30 single direct slide potentiometer product specifications

Main specifications: sliding stroke: 30mm
Rated power: 0.2W
Maximum use voltage: AC 100V;
Working temperature: -10 ° C ~ 70 ° C;
Sliding life: more than 10,000 times;

一、MECHANICAL CHARACTERISTIC
1、Sliding force ：15~150gf.cm
2、Click force ：80~330gf.cm
3、Total travel slide ：30mm
4、Lever Stop Strength：≥3Kgf.cm
5、Lever Wobble (mm p-p) ：1.6mm Max.

二、ELECTRICAL CHARACTERISTIC
1、Total Resistance Range：1KΩ＜R＜1MΩ，±20%；1KΩ≥R or R≥1MΩ，±30%
2、Resistance Taper ：B
3、Rating Power ：0.2W
4、Max. Operating Voltage ：100V AC
5、Residual Resistance：R1,2≤10Ω;R2,3≤20Ω
6、Insulation Resistance ：100MΩ 1 Minute at DC 250V
7、Dielectric Voltage ：1 Minute at AC 250V

三、ENDURANCE CHARACTERISTIC
1、Sliding Life ：10,000 cycles Min

Note:In this catalog,if some parame ters lr drawings are different from the "Approval sheet",it's subject to the "Approval sheet".

The above is the SA30 single-slide straight potentiometer specification, potentiometer handle has a variety of options, if you need other stroke straight slide potentiometer can consult Shengwei electronic right customer service.