
Ethernet Optical Transceiver
Brief introduction
Many thanks for purchasing Fast Ethernet optical transceiver! This product supports
IEEE802.3UI100Base-Tx/Fx protocol, as well as full duplex and half duplex mode. This
manual is for adaptive 100M, 10M/100M transceivers. The following purchasing guide is
for customer’s reference
Purchasing guide for optical transceivers
| Model | Specifications | |
| 10100E-MCM-2 | 10/100M adaptive, multi mode 2km, | |
| 10100E-SCM-25 | 10/100M adaptive, single mode 25km,SC | √ |
| 10100E-SCM-40 | 10/100M adaptive, single mode 40km,SC | |
| 10100E-SCM-60 | 10/100M adaptive, single mode 60km,SC | |
| 10100E-SCM-100 | 10/100M adaptive, single mode 100km,SC | |
Main features 1. In conformity to IEEE 802.3 10 Base-T standard.
In conformity to IEEE 802.3u 100 Base-TX/FX standard.
2. Max. 2M buffer memory built in chip.
3. Back pressure flow control for full duplex IEEE802.3 X and half duplex.
4. Automatic identification of MDI/MDI-X cross line.
5. High-performance1.4Gbps memory bandwidth.
6. In conformity to safety code of FCC and 15 CLASS A and CE MARK.
Installation
1. Interface
RJ-45 interface
The transmission media adopts CAT5 twisted-pair with typical length of 100 meter. Itfeatures the function of automatically identifying the through line and cross wire(10/100M).
Fiber interface
SC/ST fiber interface is of duplex mode type, including two interfaces, namely TX and RX.When the two sets of optical transceiver are interfaced or connected to switch with fiberinterface, the fiber is in cross connection, namely "TX-RX", "RX-TX" (direct butting forsingle optical fiber).
2. Connection
The network device (work station, hub or switch) with RJ-45 interface is connected toRJ-45 jack of optical transceiver through twisted-pair. And the multi/single mode fiber isconnected to SC/ST fiber interface of the optical transceiver. Then switch on. The corresponding LED is on for correct connection.(See the table below for the LED indicator lamp).