* Measuring Principle: magnetic induction (F). * Two measurement mode: Single and Continuous(Notice:Continuous mode is convenient to measure thecoating thickness of curved objects and tiny objects.) * Metric/imperial system selectable. * Manual or automatic shut down. * Automatic memory of calibration value,and automatic recognize the substrate. * Operation process have buzzing reminder,while no buzzing in continuous mode.
Principles
Applications
Examples
F Type Magnetic Induction (Iron Base)
Measure the thickness of non-magnetic materials on magnetic materials
Galvanizing layer, lacquer layer, porcelain enamel layer, phosphide layer, copper tile, aluminium tile, some alloy tile, paper etc
Principle
F Magnetic Induction
Range
0~1000µm/0~40mil
Resolution
0.1µm/1µm
Accuracy
±1~3%n or ±2.5µm
Min.Radius Workpiece
F Type:convex 1.5mm/concave 25mm
NF Type:convex 3mm/concave 50mm
Min.Measuring Area
6mm
Min.Sample Thickness
0.3mm
Metric/Imperial
Convertible
Battery Indicator
Low Battery Indicator
Automatic Power Off
√
Operating Conditions
Temperature:0~50ºC
Humidity:<80%RH
Power Supply
4x1.5V AA (UM-3)Battery
Dimensions
161x69x32mm
Weight
210g(Not Including Batteries)
Standard Accessories
Main Unit
Probe (F Type)
Calibration Base (F)
Calibration Foils (1 set, 5 pieces)
Carrying Case (B04)
Operation Manual
NOTE: The name of RS232 Software is 'RS232_EN_4.0.rar' after downloading. Just decompress 'RS232_EN_4.0.rar' with Decompress Software, Enter password:www.landtek.cn. a folder named 'RS232_EN_4.0' is abtained. There are RS232 Software and install instruction inside the folder.