Double Row C Strut Channel Roll Forming Machine (3-5mm)
Specification of Components
No | | - Technical Specification & Remark
|
1 | 3T hydraulic Un-coiler
| - Single unrolling machine, one side can put material
- Adopt automatic hydraulic system for expand
- Coil weight (Max):3000kg
- Inter diameter:420mm-510mm
- Maximal out diameter:1300mm
- Working speed: 0-20m/min adjustable
- Main motor power: 4KW AC motor
- Hydraulic power: 3kw
- Color:Blue
- Quantity:1
|
2 | Leveling part
| - The quantity of leveler rolls must be planned according to thickness 3.0mm to 5.0mm.
- Flattener roller: upper is 3 rollers, down is 4 stations(total is 7 rollers)
- Flattener roller material: SAE 1045 thermal treatment hardness 48-52 HRC.
- Diameter of flattener shaft:¢100mm, material is SAE 1045, hardening and tempering
- Power: 5.5KW AC motor
-
|
3 | Servo feeding&Punching
| - Servo feeding system
- This system adopt servo feeding to make high speed and precision
- Servo power: 4.4KW
- Servo brand: Yaskawa
- Feeding roller: SAE 1045 thermal treatment hardness 48-52 HRC.
- Material spec:GI, thickness between 1.5mm and 2.0mm
- 100T Pneumatic punching machine
- punching machine carrying capacity 100T
- punching machine adopt continue punching
- speed: 50time /MIN
- punching mould:design in 5-6 holes in one punching mould to make high speed
- Mould :Cr12 with heat treament
- brand of punching machine: Yang Li
-
|
4 | Main Roll Forming Machine
| - Roll station:21 stations +1 station of turkey head
- Roller material:cR12, 58-62,HRC hardness and chrome plated surface
- Shaft diameter: ¢100mm material: SAE1045
- Drive by gear box
- Main motor: 15KWX2
- Roller design: double row, one machine with two row roller to get different profiles
|
5 | Machine structure:
| - Main frame by whole beam welding
- Iron cast station
- Machine structure:iron cats and gear box
|
6 | Hydraulic cutting system
| - Cutting after forming: Cut the sheet after roll forming to required length
- Cutting motion: The main machine won’t stop when cutting, continuous tracking cutting.
- Adopt servo motor and ball screw to make the speed and size more stable.
- Servo power: 4kw
- Hydraulic power:11KW
- Material of blade: CR12with heat treatment
- Length measuring: Automatic encoder length measuring
- Tolerance of length: 3m+/- 1.5mm
-
|
7 | Hydraulic System
| -
-
-
- Hydraulic power: 11kw with storage tank and air cooling system, cooling fan should be bigger
- Working pressure: 20Mpa adjustable
- Solenoid valve: 2 group
- Hydraulic oil: 46# hydraulic oil
- Quantity :1
-
|
8 | Computer Control Cabinet
| -
- Programmable setting of profile length and quantity
- Operating system language: English and Chinese
- Voltage, Frequency, Phase: 380 V, 60 Hz, 3Phase
- Computer used to control length & quantity. Machine will automatically cut to length and stop when required quantity is achieved
- Length inaccuracy can be amended easily.
- Control panel: Button-type switch and touch screen
- Unit of length: millimeter
- PLC brand: Panasonic
- Transducer: Siemens
- Touch screen: MCGS
- Encoder: Omron
|
9 | Out table
| - Jointed by steel tube
- Size: about 2.0m long*0.8mwide*0.6-1mhigh
- One out table with three support roller
- Quantity: 2 units
|
10 | Spare Parts
| - Bearing: 2 pieces.
- Limit switch: 2 pieces
- Relay: 2 pieces.
- Oil tube: 1 piece
- Screws and nuts: some.
- Tools: spanner, hex spanner and adjustable wrench and other correlative adjust machine tools
|

