No | | Technical Specification & Remark |
1 | 3T hydraulic Un-coiler
| - Single unrolling machine, one side can put material
- Adopt automatic hydraulic system for expand
- Coil weight (Max):3000kg
- Inter diameter:420mm-510mm
- Maximal out diameter:1300mm
- Working speed: 0-20m/min adjustable
- Main motor power: 4KW AC motor
- Hydraulic power: 3kw
- Color:Blue
- Quantity:1
|
2 | Leveling
| - 7 roller for leveling , up 3 rollers,down 4 rollers
- Leveling roller:Gcr15 HCR50 ° feeding roller diameter of roller about 100mm
- Leveling shaft diameter about 90mm
- Power: 7.5KW
- Two feeding with gear box drive
- Leveling speed: about 30m/min
|
3 | Servo feeding&Punching
| - This system adopt servo feeding to make high speed and precision
- Servo power: 2KW
- Servo brand: Yaskawa
- Feeding roller: SAE 1045 thermal treatment hardness 48-52 HRC.
- Material spec: GI, thickness between 1.5mm and 2.5mm
- 80T pneumatic punching machine
- punching machine carrying capacity 80T
- punching machine adopt continue punching
- speed: 40time /MIN
- punching mould:design in 5-6 holes in one punching mould to make high speed
- Mould :Cr12 with heat treatment
- brand of punching machine: Yang Li
|
4 | Feeding of forming
| - Feeding is adjustable by hand wheel
- Guide sheet to forming section
- Three line rollers.
- Two hand wheel adjust size in same time
- Three profile use same feeding
|
| Roll forming pedestal
| This frame include: basic frame,motor,protect fence, cooling system - Basic frame: whole line welding structure
- Roll former has leveling bolts in the base
- Cooling system is include 3KW
- Main motor power: 30kw
- Transmission: by gear box
|
5 | Main Roll Forming Machine
Cassette:
| - Station plate thickness in 37mm. Top angle should be round.
- All bolt use 8.8 grade
- Adjust the thickness with bolt by rule design
- Roller material:Gcr15 chrome plated surface with chrome, HRC58-62 degree
- Shaft diameter: ¢80mm material: 40Cr with tempering and hardness
- Drive by gear box for each station
- Change size need change forming section, total three cassette
- Change profile need about 1.5 hour
- To avoid accidents, the driven parts will be covered with the protective cover
- Cooling system is consider
- Main power: 30KW=40HP
- Bearing use best material, bearing size will be provided during shipment machine, size is international standard size
|
6 | Hydraulic cutting system
| - Adopt the hydraulic cutting
- Cutting after forming: Cut the sheet after roll forming to required length
- Change profile need change cutter
- Material of blade:Cr12, 58-62 HRC hardness , 3 sets cutters is include.
- Cutting power by hydraulic,11KW
- Servo power: 2.9KW ,Yaskawa
- Working pressure:maximal 25Mpa
- Cutting and servo in the middle under cutting
- Length measuring: Automatic encoder length measuring
- Machine with optoelectronic switch to forbid cut the holes
- Tolerance of length: +/- 1.5mm for each piece end product
|
7 | Stacker
| - Air compressor: provide by buyer
- Speed suitable for 0-30m/min
- Length in 6m
|
8 | Computer Control Cabinet
| - Programmable setting of profile length and quantity
- Operating system language: English and Chinese
- Voltage, Frequency, Phase: 415 V, 50 Hz, 3Phase
- Computer used to control length & quantity. Machine will automatically cut to length and stop when required quantity is achieved
- Length inaccuracy can be amended easily.
- Control panel: Button-type switch and touch screen
- Unit of length: millimeter
- PLC brand: Pansonic
- Transducer: Yaskawa
- Touch screen: MCGS
- Encoder: Omron
|
9 | Hydraulic System
| - Hydraulic power: 11kw
- Solenoid valve: 1 group
- Hydraulic oil: 46# hydraulic oil
|
10 | Spare Parts
| - Bearing: 2 pieces.
- Limit switch: 2 pieces
- Relay: 2 pieces.
- Oil tube: 1 piece
- Screws and nuts: some.
- Tools: spanner, hex spanner and adjustable wrench and other correlative adjust machine tools
|