Solar Structure roll forming machine
Specification of Components
No | | Technical Specification & Remark |
1 | Manual Un-coiler
| - Width of feeding: 200mm
- Capability: 2 Ton
- Bound of expand &fight: 380mm—490mm
- Way of feeding: manual
- Color: blue
- Quantity: 1
|
2 | Flatten&Servo Feeding& punching | - Flatten
- Flattener roller: upper is 3 rollers, down is 4 stations(total is 7 rollers)
- Diameter of flattened shaft:¢70mm, material is SAE 1045, hardening and tempering
- Servo feeding system
- This system adopt servo feeding to make high speed and precision
- Servo power: 2KW
- Punching system
- Base on customer provide punching drawing, this machine need adopt one unit hydraulic punching system
- The punches and dollies will be CR-12, hardness HRC 58-62 and chrome coating.
- Hydraulic power: 7.5kw
|
3 | Main Machine:
| - Roller material: Gcr15, 58-62,HRC hardness and chrome plated surface
- Shaft diameter: ¢80mm, material is SAE 1045
- Drive: by chain, 1.0inch double lines
- Main frame by 350H beam welding
- Machine structure: wall board panel
- Change size adjust the rollers by spacer or change the rollers
|
4 | Hydraulic cuttings system
| - Machine adopts hydraulic post cutting system.
- Cutting power by hydraulic, 7.5KW
- Cutting after forming: Cut the sheet after roll forming to required length
- Cutting motion: The main machine will stop when cutting, after the motion the machine will continue automatically.
- Material of blade:Cr12 with heat treatment 58-60°, include 3 sets of cutters
- Tolerance of length: 3000mm+/- 1.5mm
|
5 | Computer Control Cabinet | -
- Voltage, Frequency, Phase: 415 V, 50 Hz, 3Phase
- Computer used to control length & quantity. Machine will automatically cut to length and stop when required quantity is achieved
- Length inaccuracy can be amended easily.
- Control panel: Button-type switch and touch screen
- Unit of length: millimeter
- Electric control system (Make by Mitsubish)
|
6 |
| -
-
- Hydraulic power: 7.5kw
- Working pressure: 12-16Mpa adjustable
- Solenoid valve: 2 groups
- Hydraulic oil: 46# hydraulic oil
- Quantity :1
-
-
|
7 | Out table
| - Jointed by steel tube
- Quantity: 3 units
|
8 | Spare Parts
| - Bearing: 2 pieces.
- Limit switch: 2 pieces
- Relay: 2 pieces.
- Oil tube: 1 piece
- Screws and nuts: some.
- Tools: spanner, hex spanner and adjustable wrench and other correlative adjust machine tools
|

