Welcome Customer !

Membership

Company Name: Shenzhen gooderly Technology Co., Ltd
Free Member ·1YRS
,
Other

Main Products: 传感器、变送器

Xwboo>Products

OMS10 series universal oil mix water switch

Model
Nature of the Manufacturer
Other
Product Category
Oil mixed water switch
Place of Origin
City, Province
Overview
OMS10 series universal oil mix water switch
Product Details
Oil mix water switch product features

Emergency alarm alarm mode can be set for the upper limit or lower limit alarm
U each pair of stations were continuously adjustable
Taken the cylindrical capacitor design, resistance to electromagnetic interference
U using special chip detection capacitance, accurate and reliable, small temperature drift
Taken the wide detection range (0% 10%)

Oil mix water switch product introduction

In hydropower stations, power plants and large oil pumping station system of oil box, back to the fuel tank and oil/water heat exchange in the tank, if mixed with water, will cause a lot of harm, the main hazards are:
(1) the water react with oil, acid, gum and sludge.
(2) reduce the lubricity, accelerate the high stress wear parts.
(3) caused by bond or other low pressure parts of the control valve to produce cavitation damage;
(4) corrosion, rust metal. So must strengthen the monitoring of oil mix water, allow users to timely testing and processing of oil, to ensure normal operation of the unit and system.
OMS oil mix water switch is using special circuit design of a high performance oil mix water detection device. It has two independent emergency alarm, two stations were continuously adjustable, and can according to need to set the alarm at the scene, can also according to the need for 4-20 ma output or 1-5 v output, is a high performance oil mix water switch. OMS oil mix water switch can be widely used in petroleum, chemical, electric power, water treatment, metallurgy, paper making, shipbuilding and boiler oil mix water measured from all walks of life.

Oil mix water switch works

OMS oil mix water switch is a cylindrical capacitance sensor, the formula of cylindrical capacitor is: C = 2 PI. Epsilon &western. Epsilon. L/(ln) R squared/R creates)
Among them, the epsilon &western = 8854 & have spent 10 ¯ antispasmodics & have spent (vacuum dielectric constant)
R = the dielectric constant of the medium between the poles,
L = the height of the cylinder;
R1 = inside diameter of electrode;
R2 = outside the inner diameter of the electrode.
For each specific product, in addition to  r (dielectric constant of the medium between the poles), outside of the parameters are fixed.




Oil mix water switch schematic
Under normal circumstances, the medium to be measured is pure oil, water content is 0%, then  r = epsilon (oil) as a fixed value, after the oil contained water, due to the dielectric constant of water is greater than lard, when  r = epsilon mix water (oil) will change, that is to say, if the liquid in the cylindrical capacitance sensor changes in water content, the dielectric constant changes, so the capacitance sensor has also changed, capacitance value as to how much water content changes, OMS oil mix water switch circuit part can be calculated by measuring the capacitance value of liquid water content. When the oil in water content reached set value, OMS oil mix water switch output signal alarm contacts. The benefits of this kind of cylindrical capacitance sensor is solved the problems of shielding of electromagnetic field, the measured results are accurate, high precision, small temperature drift, is not affected by the outside world.


OMS double contact oil mix water controller parameter

1. The power supply voltage: DC24V plus or minus 10%, AC/DC110V / 220 v (85 ~ 264 vac, 85 ~ 370 VDC)
2. Range: the moisture content of 0 ~ 10%
3. Contact output: 1-2 5 a / 250 VDC, 5 a / 30 VDC
4. The analog output: 4-20 ma, or 1 to 5 v
5. Power consumption: < 1 w
6. Resolution: 7. 0.1% repetitive: 1% or less
8. Temperature drift: 0.03% / ℃
9. The operating temperature: 0 ~ 100 ℃
10. Electrical wiring: PG9 seal joint,
11. The sensor material: SUS304/316, brass
12. Working pressure: < 2 mpa
13. Protection grade: IP65



Similar Product Recommend