Welcome Customer !

Membership

Company Name: Shenzhen gooderly Technology Co., Ltd
Free Member ·1YRS
,
Other

Main Products: 传感器、变送器

Xwboo>Products

PDD1020 series of differential pressure transmitter

Model
Nature of the Manufacturer
Other
Product Category
Differential pressure transmitter
Place of Origin
City, Province
Overview
PDD1020 series of differential pressure transmitter
Product Details

PProduct introduction

PDD1020 series of differential pressure transmitter to measure two differential pressure signal of a transmitter, it is mainly used for measuring liquid, gas or steam differential pressure, pressure, liquid level and density, and then convert them into 4 ~ 20 ma. DC signal output. PDC type pressure transmitter can be widely used in petroleum, chemical, electric power, water treatment, metallurgy, paper making, shipbuilding and from all walks of life such as boiler is operating, differential pressure and liquid level measurement.


The working principle of
Of high and low pressure measured medium into the measuring element of high and low pressure chamber, respectively, on the isolation membrane, liquid filling the two isolation diaphragm pressure signals to the central diaphragm on the center measuring diaphragm is an elastic element of tension, effect on the both sides of the center of pressure measuring diaphragm produce a corresponding to the pressure difference of deformation, the deformation is proportional to the measured pressure, the displacement of the capacitor plate produced the corresponding capacitance change, after the circuit module detects the change of the capacitance value transform it into the differential corresponding 4-20 ma current signal.

Product features
1, good linear, high precision
2, high overload capacity, stability is good
3, standard 4-20 ma output
4, light weight, strong earthquake
5, the structure of the explosion-proof, all-weather use
6, easy installation, easy maintenance



Technical parameters
Measuring medium: gas that is compatible with 316 l
Measuring range: (KPa - - 100) (100) Pa Pa - 200-0 to 100 KPa
Precision level: 0.25, 0.5
Overload capacity: the range of 2-3 times
Long term stability: less than 0.25% FS/year, less than 0.5% FS/year
Power supply: 15 ~ 36 VDC calibration voltage (24 VDC)
: (4 ~ 20 mA output signal (two/three/four wire), mA (0 ~ 10/20), (0 ~ 5) V, V (1 ~ 5), (0 ~ 10) V, etc


Load resistance: R = 12.5 RD (U - 12.5)/(U as the power supply voltage, RD for cable resistance)
Working temperature: - 30 ~ 70 ℃
Compensation temperature: - 20 ~ 70 ℃
Shell material: 1 cr18ni9ti
Stability: less than + / - 0.2% FS, plus or minus 0.5% FS
Process connections: male G1/2, M20 x 1.5 or user customization
Protection grade: IP65


Similar Product Recommend