Welcome Customer !

Membership

Company Name: Shenzhen gooderly Technology Co., Ltd
Free Member ·1YRS
,
Other

Main Products: 传感器、变送器

Xwboo>Products

HWT20 series magnetic liquid level transmitter

Model
Nature of the Manufacturer
Other
Product Category
Magnetic liquid level transmitter
Place of Origin
City, Province
Overview
HWT20 series magnetic liquid level transmitter
Product Details

Product introduction
HWT20 series magnetic liquid level transmitter using high quality magnets through special treatment, with imported magnetic induction module, the liquid level can be converted into a variable resistance signal, and then through the industrialization of MCU is transformed into 4-20mA standard current signal, while providing LCD shows that the product has the advantages of simple structure, convenient operation, stable performance, long service life and convenient installation is a high cost performance products. It can be widely used in oil, chemical, electric, water treatment, metallurgy, paper, ship and boiler and other sectors of the liquid level measurement.
Working principle
The HWT20 series magnetic induction liquid level transmitter is mainly designed and produced on the basis of the principle of buoyancy and static magnetic field. The test pipe is provided with a set of magnetic induction module and precision resistor, floating ball with magnet (the floating ball) in the measured medium position by the effect of buoyancy liquid level change, magnetic float position, when the liquid level, the float will lift tube in the liquid level detection of dry reed is orderly connected by a magnet effect makes the transducer resistance value changes, conversion circuit module inside the terminal box resistor signal into a continuous current output signal of 4-20mA, transferred to the instrument or other two display devices, remote monitoring.
Product features
1. The structure is simple and easy to install
2. The performance is stable and reliable, and the anti-interference ability is strong.


3, standard 4 ~ 20mA current transmission, versatility;
4, LCD display, easy to observe


Technical parameters
1, the volume range: 0-8000 - mm
2, the sensor tube: stainless steel 316 l / 304
3, the shell material: aluminum alloy
4, distinguishing rate: 5 mm
5, high pressure: 0 to 10 bar
6, environment temperature: - 10 ℃ to 100 ℃
7, working voltage: DC24V (12-36 v)
8, power: 720 mw or less
9, analog output current: 4-20 ma, two wire load impedance < 750 Ω
10, working pressure: 1.6 MPa to 2.5 MPa
11, connection mode: threaded or flanged
12, connection forms: 2088 junction box
13, shell protection: IP65
14, the guide bar diameter: Ф 9 mm ~ Ф 25 mm
15 and insulation impedance: 500 VDC, 100 m Ω



Similar Product Recommend