Used in all kinds of fryers, flat tube structure has unique advantages, better heat dissipation and high heat conversion rate. It is easy to clean and will not affect the service life due to the unclean cleaning of oil dirt on the pipe surface. Even heating and large-area contact make the food cooked more comprehensively. The pipe and seal are made of high-quality materials and fine welding technology. The insulation of the whole product is not electrified and safe to use Annai Annai electric fryer flat electric heating tube is a high-quality product specially launched to serve this industry!, Replace new equipment, invest new technology and upgrade previous similar products. At present, there are standardized products, which can also be customized according to demand.


Main parameters:
Pipe: stainless steel
Insulating material: high purity magnesia powder,
Heating wire: ni8ocr20 nickel grid wire
Pipe diameter: Φ 5mm- Φ 25mm
Diameter tolerance: - 0.02mm-0.08mm
Pipe length: maximum length 3000mm
Pipe length tolerance: ± 5%
Appearance requirements: the surface shall be smooth without scratches, spots and depressions
Unheated length: customized on demand
Watt density: max. 40W / cm ²
Power tolerance: ± 10% (± 5% - 10%)
Surface temperature: tube surface temperature, maximum temperature 927 ℃
Element temperature: maximum heating temperature
Connector temperature: maximum temperature 260 ℃
Connection voltage: customized on demand
High voltage strength: minimum 800vac, maximum voltage of heating ring 1250v
Insulation resistance: ≥ 5m Ω (under 500VDC)
Leakage current: ≤ 0,5 MA (at 253 V AC)
Electrical performance: leakage current less than 0.5mA
Outgoing line mode:
Outgoing line
The inner outgoing line has better protection, and the wire is not easy to break, but the cost is higher than that of the outer outgoing line
Outlet angle:
Direct outgoing line, 90 degree angle outgoing line, side outgoing line, etc. are customized according to the needs of equipment installation and wiring