Welcome Customer !

Membership

Shenzhen Annai electrothermal Technology Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 电热管

Xwboo>Products

Shenzhen Annai electrothermal Technology Co., Ltd.Free·1YRS

  • E-mail

    annaiheat@163.com

  • Phone

    0755-84874458

  • Address

    18 xihutang street, Pingdi street, Longgang, Shenzhen

Contact Now

circular

Model
Nature of the Manufacturer
Other
Product Category
Hot runner
Place of Origin
City, Province
Overview
Model:Description:The hot nozzle applied to the hot runner is directly sleeved or a steel sleeve is added on the outside. Mold heating ensures that the plastic melt has good fluidity in the mold cavity. Therefore, the mold temperature directly affects the molding, quality and performance of the products to be processed. Hot runner is a heating component used in injection mold to inject melted plastic particles into the mold cavity. The thermal nozzle is divided into open thermal nozzle and needle valve thermal nozz......
Product Details

The hot nozzle applied to the hot runner is directly sleeved or a steel sleeve is added on the outside. Mold heating ensures that the plastic melt has good fluidity in the mold cavity. Therefore, the mold temperature directly affects the molding, quality and performance of the products to be processed. Hot runner is a heating component used in injection mold to inject melted plastic particles into the mold cavity. The thermal nozzle is divided into open thermal nozzle and needle valve thermal nozzle. Because the form of hot nozzle directly determines the selection of hot runner system and mold manufacturing, the hot runner system is often divided into open hot runner system and needle valve hot runner system. Spring heating ring is generally used for heating

 

Main parameters:

 

Pipe: stainless steel

 

Insulating material: high purity magnesia powder,


Heating wire: ni8ocr20 nickel grid wire


Pipe diameter: Φ 5mm- Φ 25mm


Diameter tolerance: - 0.02mm-0.08mm

 

Pipe length: maximum length 3000mm


Pipe length tolerance: ± 5%

 

Appearance requirements: the surface shall be smooth without scratches, spots and depressions

 

Unheated length: customized on demand

 

Watt density: max. 40W / cm ²


Power tolerance: ± 10% (± 5% - 10%)

 

Surface temperature: tube surface temperature, maximum temperature 927 ℃

 

Element temperature: maximum heating temperature

 

Connector temperature: maximum temperature 260 ℃

 

Connection voltage: customized on demand

 

High voltage strength: minimum 800vac, maximum voltage of heating ring 1250v

 

Insulation resistance: ≥ 5m Ω (under 500VDC)

 

Leakage current: ≤ 0,5 MA (at 253 V AC)


Electrical performance: leakage current less than 0.5mA

 

Outgoing line mode:

 

Outgoing line


The inner outgoing line has better protection, and the wire is not easy to break, but the cost is higher than that of the outer outgoing line

 

Outlet angle:

 

Direct outgoing line, 90 degree angle outgoing line, side outgoing line, etc. are customized according to the needs of equipment installation and wiring

Similar Product Recommend