Welcome Customer !

Membership

Dongguan Shijie Weihua Electronic Machinery Factory
Free Member ·1YRS
,
Other

Main Products: 绕线机

Xwboo>Products

Dongguan Shijie Weihua Electronic Machinery FactoryFree·1YRS

  • E-mail

    weihuadg99@163.com

  • Phone

    86-0769-86639646,86639647

  • Address

    2nd Floor, No. 187-189, Dongfeng North Road, Southwest Village, Shijie Town, Dongguan City

Contact Now

RX-766B six-axis automatic stranding machine

Model
Nature of the Manufacturer
Other
Product Category
Stranding machine
Place of Origin
City, Province
Overview
RX-766B six-axis automatic stranding machine
Product Details

product manual

RX-766BStranding machineIt is a four-axis-six-axis automatic winding machine with a stranding machine attached to the front, which has the following advantages:

1. Numeric key navigation operation, one-handed setting, simple and easy to understand, there are four to six axes for selection

2. High-precision wiring, high-speed winding, and high-efficiency automatic twisting function

3.Six-axis winding machineUse FLSH ROM to store stranded wire data, each stranded wire data can be named separately, any one of them can be called for stranding at any time, and the data will not be lost after the power is off, and the length of the stranded wire can be adjusted

4. Twisting shaft, spooling shaft, (spooling shaft) provide 0~99 speed selection, output setting related to mechanical configuration.

5. The stranding machine can be purchased separately with the controller.

6. The function of automatic fault judgment can automatically prompt misalignment information when setting parameters or errors in operation, which can save labor.

Model: RX-764B/766B

Power supply voltage: 220V50/60HZ

Winding motor: Brushless 400W6000RPM

Speed: 10000RPM

Number of shares: 3-19 (odd 0DD-NUMBER)

Wire diameter: 0.01~0.25mm

Stranded wire length: 130mm-300mm

Number of twisted coils: (density) 1-999T

Stranded wire motor: AC200W servo motor

Machine weight: 75kg

Machine size: 80*53*1500px

Features:

1. The maximum speed of the spindle is 10000rpm.

2. Automatic tension control: When twisting the wire, the tension of the take-up wire needs to be increased continuously when the full reel is received from the bottom of the reel. The machine can automatically track and adjust the take-up tension; make the tension of the entire reel uniform, and the machine can not Stop the machine to adjust the tension.

3. The main engine is lubricated by engine oil and cooled by natural circulation, which effectively prolongs the service life of the spindle bearing.

The thread passing system adopts a new structure. The wire passes directly from the main shaft guide wheel to the bow belt, minus the scratches and jumps caused by the failure of the corner guide wheel on the aluminum plate.

4. There are three compression devices in the machine to ensure the roundness of the conductors after stranding and reduce the loss of insulating materials.

5. The whole machine adopts synchronous belt transmission, and there is no lubrication point in the machine, which keeps the machine clean, and the stranded wire is free of oil stains. It is suitable for conductor stranding of various wire types with high surface cleanliness requirements.

6. To adjust the twisting pitch, only need to replace a take-up wheel, and adjust the twisting direction only to turn the reversing rod, which is simple and convenient to operate, thereby reducing the error rate and work intensity of the operator. ·The bearings of the whole machine are made of well-known Japanese brands, and the bow straps are made of new materials, which are flexible, and avoid jumps caused by vibration when running at high speeds. The frequency converter, PLC, magnetic powder clutch, electromagnetic brake, hydraulic jack, etc. Brand, reduce failure rate and maintenance cost.



Similar Product Recommend