Welcome Customer !

Membership

Dongguan Shijie Weihua Electronic Machinery Factory
Free Member ·1YRS
,
Other

Main Products: 绕线机

Xwboo>Products

Dongguan Shijie Weihua Electronic Machinery FactoryFree·1YRS

  • E-mail

    weihuadg99@163.com

  • Phone

    86-0769-86639646,86639647

  • Address

    2nd Floor, No. 187-189, Dongfeng North Road, Southwest Village, Shijie Town, Dongguan City

Contact Now

RX-TP02 Automatic Gluing Machine

Model
Nature of the Manufacturer
Other
Product Category
Glue machine
Place of Origin
City, Province
Overview
RX-TP02 Automatic Gluing Machine
Product Details

Features:

1. The tape inner ring is suitable for 34mm~77mm;
2. Rain-shaft coated tape, the tape axis distance is from 14mm~85mm;
3. The position of the tape can be adjusted, and the tensioner can be fine-tuned;
4. For different products, different jigs must be replaced, which is simple and quick to replace.


Detailed description

automaticRing type glue machineThe adjustable stroke is super large, which can be adjusted from 23-90, which increases the customer's minimum and maximum product range. Generally, the adjustment range of the tape machine is 34-77, which means that the rotation diameter is less than 34. For products, the customer wants a specification of a tape wrapping machine, a product with a revolving diameter greater than 77, and another specification, while the automatic tape wrapping machine can include a product with a revolving diameter of 23-99 in a rule.

The tape tension of the automatic tape wrapping machine can be adjusted. When wrapping smaller products, the tension can be adjusted to avoid pulling down the product. When wrapping larger products, the tension can be increased to make the product tighter. All moving parts such as the chainring and panel of the automatic tape machine are hardened, and the equipment life is guaranteed by the craftsmanship. Automatic tape wrapping machine, the manufacturer specializes in production, quality and after-sales are guaranteed, and the design has reserved extended functions.

OneStranding machineIn the process of automatic tape wrapping, the customer hopes to omit a process of intermediate lining paper. First, he sent a thread package, lining paper, and tape (thickness 0.05), and the effect of the automatic tape wrapping machine is required to be flat. Keep double eyelids to a minimum.

The width of the tape is 30 wide. The rotation center of the product is slightly non-parallel to the rotation center of the tape tray during the clamping rotation, and it is prone to wrinkles. The wider the tape, the higher the parallelism requirement.

Moreover, in general, the adhesive force between the tape and the line package is poor. The customer has a layer of interleaving paper in the center line package before the tape. The purpose is to increase the adhesion between the tape and the line package, and the flatness of the package is also improved. To improve.

Another point is to require better tension control, because excessive tension will undoubtedly cause the tape of the automatic tape wrapping machine to drive the product at the moment of cutting, the neatness of the light side tape winding will be affected, and the heavy will cause the product to fall off the fixture.

Finally, we communicated with the customer about the adhesion problem. In addition to the improvement of the attachment force due to the neat wiring, an elastic device was added to solve the problem.

In the end we use automaticGlue machineThe sample was delivered to the customer, which was recognized by the customer, so that the customer's idea of ​​saving one process was realized. Later, when our company visited the equipment with the customer, the customer mentioned that the customer later changed a relatively thick tape. This problem It has been satisfactorily resolved.


Similar Product Recommend