Welcome Customer !

Membership

Dongguan Shijie Weihua Electronic Machinery Factory
Free Member ·1YRS
,
Other

Main Products: 绕线机

Xwboo>Products

Dongguan Shijie Weihua Electronic Machinery FactoryFree·1YRS

  • E-mail

    weihuadg99@163.com

  • Phone

    86-0769-86639646,86639647

  • Address

    2nd Floor, No. 187-189, Dongfeng North Road, Southwest Village, Shijie Town, Dongguan City

Contact Now

RX200 crochet type digital loop winding machine

Model
Nature of the Manufacturer
Other
Product Category
Ring type winding machine
Place of Origin
City, Province
Overview
RX200 crochet type digital loop winding machine
Product Details

RX-200 Crochet DigitalRing type winding machineUsing TWC-01 controller, it is a simple program to set up, using pneumatic crochet method to wind the loop-shaped coil, it has the following advantages:
1. Pneumatic crochet type is adopted, and the inner diameter and enameled wire diameter are limited.
2. Special crochet hook for precision processing, which will not hurt the enameled wire.
3. Use foot pedal to start, convenient and quick.
Ring typeFishing line winding machineIt is composed of three parts: head, fixture, and base. It is different from the flat winding machine. The same head can be used for different wire diameters and windings with different inner diameters after replacing the wire storage ring of different specifications. Products and clamps also have a corresponding clamping range.
Generally, the following consumable parts on toroidal winding machines need to be replaced frequently:
(1) The wire storage ring, also called the steel ring (Shuttle), is one of the most important parts on the nose, used to complete the wire storage and winding work; its quality directly affects the service life and indirect costs And the quality of the winding products.
(2) Support wheels, also called guide wheels, have different numbers of support wheels for different machine heads, and their material is directly related to the service life.
(3) Fixture roller, the life of this part is related to the wire diameter, size and material of the product being wound.
(4) Belts, side slides and other consumable parts.
In general, the ring typeTransformer winding machineNot only the product produced is completely different from the flat winding machine, the consumption cost of its entire life cycle is also greatly increased. Once the horizontal winding machine is purchased, generally only the cost of making different tools will be incurred. After the purchase of the toroidal winding machine, different storage rings and support wheels need to be replaced according to the diameter and size of the produced products. Because the copper wire is always stored from the storage One side of the wire loop slides out (belt type and side slide type), the force of the storage ring is uneven, after a certain period of time, the storage ring and support wheel need to be replaced before production can continue! Of course, the added value of the toroidal coil is much higher than that of the flat-wound coil, and it can bear this part of the cost.