ET4900-JY Engine oil thermostatic system
Et4900-jy Engine oil Thermostatic system - Product background
Summary:
With the continuous development of the auto industry, the engine speed and power are constantly improved, and the increasing thermal load puts forward higher requirements for the reliability of the engine lubrication system. One of the main factors affecting the reliability is that the oil temperature is too high, the viscosity decreases significantly, the stability decreases, the oxidation deteriorates the household, the pressure is low, easy to cause the burning axle bush, burning crankshaft, cylinder liner and other faults. Therefore, in order to ensure the best lubrication effect of engine oil and improve the reliability of lubrication components, the engine oil should be kept at 95℃ for a long time, and the oil cooler should be equipped in the lubrication system.
Et4900-jy engine oil thermostatic system is designed and manufactured according to the national standard GB19297-2001 "Engine Performance Test Methods", and is used for engine bench test. The system adopts the engine oil sump oil circulation mode to control the oil temperature, and the temperature is 60-140℃ oil temperature control. It has good safety and is not affected by engine operating condition and ambient temperature change.
Considering the convenience of user's use and maintenance and the need of control, this system adopts movable structure.
Et4900-jy Engine Oil thermostatic system -- Performance Indicators:
model | ET4900-JY |
Specification (Applicable power (dynamometer)) | ≤400kW |
Power supply (excluding power of options such as heater) | 380V±10%;50Hz±1Hz;2kW |
220V±10%;50Hz±1Hz;0.2kW |
Temperature control range | 45-130℃ |
Control precision | ±2℃ |
Control instrument | Temperature control instrument |
External cooling water requirements | |
Maximum inlet (cooling water) temperature | ≤32℃ |
Plate heat exchanger | 0.5m² |
Cooling water pressure | 0.3-0.4MPa |
Cooling water flow (inlet/outlet differential pressure: 2bar) | 6m³/h |
Pressure drop under nominal flow(Dp) | 40kPa |
External cooling medium | |
PH | 7.2-9.5 |
freeCO2(mg/l) | <3 |
Carbonate hardness(ºdH2) | <5 |
Total hardness(ºdH(dH=10mg/l) | <8 |
salt(mg/l) | <2400 |
chloride(mg/l) | <150 |
nitrate(mg/l) | <50 |
The iron content(mg/l) | <1.0 |
Manganese content(mg/l) | <0.15 |
The oil content(mg/l) | 0 |
The algae(m/L) | 0 |
Internal cooling medium | The oil |
Oil or lubricating oil loop connection | |
Engine oil outlet | DN15 |
Engine oil inlet | DN15 |
External cooling water loop connection | |
Cooling water intake | DN25 |
Cooling water outlet | DN25 |
Circulating pump | |
traffic | 2.0m³/h |
power(380VAC) | 1.5kW |
Preheating function | |
Electric heating power | 2kW |
Traffic monitoring | |
Flow monitoring accuracy | ±3%FS |
Oil pressure regulating | |
Oil pressure adjustment range | 100kPa-400kPa(manual) |
Accuracy of oil pressure regulation | ±15 kPa |
ET4900-JY Engine oil thermostatic system - main applications
Applied to various small and medium power engine test support systems.