CNC/Full automatic stud welding system F 400
CNC/Full automatic stud welding system F 400
The cost-effective entry-level model F 400 impresses with its high-quality features. A robust welded steel machine frame as well as the safety housing with protective shields and door are standard equipment. Series PRO-C and PRO-D stud welding units as well as the stud welding heads KHA-200F and KKA-200F are applied.
The working area of the machine is 400 x 400 mm. It is suitable for different welding methods (capacitor discharge, short cycle and drawn arc stud welding). Even for untrained operators the F 400 is easy to operate and to program and can be retooled very fast.
working area X/Y: 400 x 400 mm
welding range
stud diameter 3-8 mm, stud length 6-50 mm (Other diameters and lengths as well as special welding elements upon request as special production.)
max. number of stud welding heads: 1
max. operating speed of the X-/Y-axis: 6 m/min
positioning accuracy of the welded studs: +/- 0,2 mm
Fast and easy programming by operating software i1stud.
i1stud enables - besides programming directly on the machine - entering the welding coordinates on an external PC. Thus idle times by programming on the machine can be avoided.
optional: operating software i3stud (inkl. DXF data converter) with operating terminal with industrial panel PC
(DXF data import: The customer-specific DXF-data are automatically converted and transfered to the controller. Visualization of the program sequence.)
ample program memory
very easy operation
welding parameter monitoring and documentation (by stud welding units PRO-D/PRO-C)
- recording of welding current, welding time and arc voltage for each weld
- recording of stud travel (lift, piston runtime, immersion depth) for each weld [only when an automatic welding head with travel measuring system is used]
- comparison of the recorded welding parameters (actual values) to the parameters of a reference weld (set values) (tolerances adjustable)
- in case of variances to the reference weld a warning is displayed or the unit is locked for further welds until the release by the operator (functionality can be switched off)
- storage of the last ten welding parameter sets
- optional (also retrofitable): welding parameter memory for the storage of 24500 welding parameter sets (storage with date and time) with USB-interface for data transmission (welding parameter sets) to a PC
- optional (also retrofitable): PRO-xDataLog
The software PRO-xDataLog enables - besides reading out the welding parameter memory - the real-time transmission (Live Logging) of the welding parameter sets recorded by the stud welding unit to a PC that is connected to the stud welding unit. Immediately after each weld the welding parameter set (with date and time) that is recorded by the unit is written into a file on the connected PC. There the data can be analyzed (e.g. by MS Excel) and stored.
automatic stud feeding
very good accessibility of the machine (control is integrated in the frame)
flexible positioning of the pneumatic clamps on the machine table
short set-up and retooling times
quick change system for welding heads
free zero points (zero point shift)
re-weld function with program continuation
housing with door (design as sliding, folding or lift door (if required also pneumatically)) or light curtain
optional: housing with closed top as sound insulation housing
high processing speed due to servo motors
premium axes with high-precision guides and threaded spindle warrant a maximum of precision and reliability
inside slide mountings with sealing bands avoid damages to the drive caused by welding spatters, smoke and dust
very robust and warp resistant welded steel machine frame
machine table made from aluminium T-grooved plates with laminated fabric plates for electrical insulation and as wear protection
pneumatic working lift/welding head 80 mm (mechanic adjusting range through precision crank handle 40 mm)
The machine is suitable for all stud welding methods.
The following stud welding units and automatic stud welding heads can be used:
PRO-C 1000/1500 = stud welding units for capacitor discharge stud welding (contact and gap method)
PRO-D 1200/1600 = stud welding units for drawn arc and short cycle stud welding
KHA-200F with integrated travel measuring system = automatic stud welding head for capacitor discharge (gap and contact method), drawn arc and short cycle stud welding
KKA-200F = automatic stud welding head for capacitor discharge stud welding (contact method)
connection values
electrical (mains supply, mains fuse external): 230 V/50 Hz, 16A
pneumatical: ≥ 6 bar, unoiled, dry, clean
OPTIONS: - fluid spraying device for targeted wetting of the welding point before welding for the welding head
pneumatic single stud feeding, manual stud insertion (e.g. for feeding special studs (special geometries, overlong studs))
stud switch for feeding studs with the same diameter but different lengths into one welding head
pneumatic mass clamps standard
pneumatic mass clamps aperture angle 90°
mechanic mass clamps mounted on welding head
pneumatic mass clamps mounted on welding head
workpiece downholder for the welding head
shielding gas module for the welding head
robust welded steel underframe with undershelf