Welcome Customer !

Membership

SHANGHAI BAIGANG VALVE GROUP CO., LTD
Free Member ·1YRS
ShangHai,ShangHai
Manufacturer

Main Products: valve

Xwboo>Products

SHANGHAI BAIGANG VALVE GROUP CO., LTDFree·1YRS

  • E-mail

    baigangvalve@163.com

  • Phone

    86-021-57278880,021-57278881

  • Address

    1918 Ting Zhu Road, Tinglin Industrial Park, Jinshan District, Shanghai

Contact Now

Z41X Rising Stem Soft Seal Gate Valve

Model
Nature of the Manufacturer
Manufacturer
Product Category
Gate Valve
Place of Origin
ShangHai City, ShangHai Province
Overview
Z41X Rising Stem Soft Seal Gate ValveProduct overviewProduct model: Z41XNominal diameter: DN15-600 mmNominal pressure: PN1.6~2.5MPaApplicable temperature: 0 ~ 80℃Applicable medium: waterBody material: ductile iron, etcDrive mode: manual, electric, pneumatic, etcFlange standard: GB/T 17241.6GB9113Test standard: GB13927 AP1598
Product Details

Z41X Rising stem soft seal gate valve product overview

Z41X Rising stem soft seal gate valve produced and sold by Baigang valve group addition to the advantages of the elastic seat gate valve, and can be more intuitive display valve opening, opening and closing quickly and reliably, it is often used in fire and industrial systems. Generally installed at a higher position from the ground. I plant the introduction of European high-tech valve manufacturing technology produced by the seat block valve, the use of the whole door plastic deformation generated deformation effect to achieve a good sealing effect, to overcome the poor general valve seal, leakage and rust phenomenon. It can be widely used as a regulating and intercepting device in fluid lines such as tap water, sewage, construction, petroleum, chemical, food, medicine, light injury, electric power, shipping, metallurgy and energy system. 
 
Z41X Rising stem soft seal gate valve characteristic
 1, the overall plastic package: The gate with the overall plastic package, its good coverage and precise geometric dimensions to ensure reliable sealing, life expectancy. 
 2, light weight: made of ductile iron body, light weight, easy to install. 
 3, flat bottom valve seat: the bottom of the same flat-type valve seat with water pipe design, does not produce debris siltation, sealing more reliable. 
 4, corrosion-resistant: Cavity non-toxic epoxy coating to prevent corrosion and rust, not only for drinking, but also for the sewage system. 
 5, three "0" seal: the stem adopts three 0-ring seal, friction resistance, light switch, watertight.


Third,  open-rod soft seal gate valve main performance parameters

Pressure Level1.0 MPa, 1.6 MPa, 2.5 MPa
Body pressure1.5MPa, 2.4MPa, 3.75MPa
Seal test1.1 MPa, 1.76 MPa, 2.75 MPa
Operating temperature0 ~ 80 ℃
Suitable mediawater


Z41X Rising stem soft seal gate valve parts of the main material

Serial numbernamematerialSerial numbernamematerial
1BodyDuctile iron8Thrust padTin bronze
2gateDuctile iron coated EPDM9SleeveTin bronze
3boltGalvanized10boltGalvanized
4Sealing ringNBR11Shaft coverDuctile iron
5capDuctile iron12Dust coverNBR
6Valve stemstainless steel13Handwheelcast iron
7"O" ringNBR14Tighten the nut


Z41X Rising stem soft seal gate valve main dimensions of connection

DN

50

65

80

100

125

150

200

250

300

350

400

L

178

190

203

229

254

267

292

330

356

381

406

HA

322

332

350

420

581

581

736

882

1009

1300

1380

HC

374

398

429

524

721

736

942

1031

1117

1655

1805



Similar Product Recommend