ZF83Y Clamp High Pressure Flat Gate Valve

NegotiableUpdate on July 20

Model

Nature of the Manufacturer: Manufacturer

Product Category: Oilfield Valve

Place of Origin: ShangHai City, ShangHai Province

Online Consult Contact Information

Overview

ZF83Y Clamp High Pressure Flat Gate ValveProduct overviewProduct model: ZF83YNominal diameter: DN25 ~ 200mm,NPS 1" ~ 8"Nominal pressure: PN15 ~ 450MPa, Class900 ~ 2500LBConnection mode: flange, butt welding, clampSealing properties: H- alloy steel, F- reinforced polytetrafluoroethylene, Y- carbideDrive mode: manual, bevel gear transmission, electric

Product Details

ZF83Y Clamp High Pressure Flat Gate Valve product introduction

ZF83Y Clamp High Pressure Flat Gate Valve produced and sold by Baigang valve group, This series of products adopt the new balanced floating seal structure, which is suitable for the opening, closing and adjusting devices of the controlling medium on the oil, gas and other pipelines whose pressure is not more than 40MPa and the temperature is not higher than 120 ℃. The product structure is novel in design and material selection Proper, measured strictly, light operation, with strong anti-corrosion, wear resistance, erosion resistance, is the oil industry an ideal new equipment.

ZF83Y Clamp High Pressure Flat Gate Valve structural features and working principle

1, the use of floating seat, two-way opening and closing, reliable sealing, opening and closing flexible.

2, the lower part of the gate open diversion hole, and to give precise guidance, while the seal are sprayed

Carbide welding, erosion-resistant.

3, the body carrying capacity is high, the channel is straight-through, fully open, and the gate diversion hole

Similar phase-through and straight pipe, flow resistance is small. Stem composite filler, multiple seals, making the seal reliable, small friction.

4, closing the valve, turn the hａnd wheel clockwise, the gate moved to the bottom, due to referral

The role of quality pressure, the inlet seal seat to the gate direction. A larger seal than the pressure, thus forming the first seal. At the same time, the gate pressure to the outlet seal seat, a double seal.

5, due to the double seal, it can be in the pipeline does not affect the work even more

For wearing parts. This is our factory product priority over similar products at home and abroad an important feature.

6, open the gate, turn the hａnd wheel counterclockwise, the gate up, diversion holes and channels

Hole through. With the rise of the gate, the through hole gradually increases to the limit position, the guide hole coincides with the passage hole, then fully open.

ZF83Y Clamp High Pressure Flat Gate Valve performance specifications

Pressure Level	16	20	25	32	35	40
Working pressure (Mpa)	≤16	≤20	≤25	≤32	≤35	≤40
Strength test (Mpa)	24	30	37.5	48	52.5	60
Seal test (Mpa)	17.6	22	27.5	35.2	38.5	44

medium	Water, oil, natural gas
temperature	-19 to 120 ° C

ZF83Y Clamp High Pressure Flat Gate Valve shape and connection dimensions

Nominal pressure (MPa)	Nominal diameter (mm)	Size (mm)
Nominal pressure (MPa)	Nominal diameter (mm)	D	G	C	L	E	H	W	L0
16 20	40	36	43	64	210	82	356	240	430
	50	46	52	70	242	100	379	260	460
	65	58	63	89	260	125	402	280	500
	80	72	78	108	310	157	475	320	550
	100	90	95	130	450	183	548	350	610
	150	135	150	195	550	262	660	450	750
25	40	36	43	64	210	82	356	240	430
	50	46	56	76	310	120	379	260	460
	65	53	67	89	340	132	402	280	500
	80	65	86	114	380	157	475	320	550
	100	80	101	133	450	183	548	350	610
	150	130	167	219	620	272	793	450	750
35	40	36	43	64	210	82	356	240	430
	50	46	56	76	300	123	379	260	460
	65	53	67	89	340	136	402	280	500
	80	65	86	114	380	162	475	320	550
	100	80	101	133	450	188	548	350	610
	150	130	167	219	620	278	793	450	750

ZF83Y Clamp High Pressure Flat Gate Valve use, maintenance, care and precautions

1, the valve has been made before the factory strength and seal test, all connections should be used to maintain the initial state.

2, this series of valve operation handwheel marked with the opening and closing rotation signs, the upper rod with open and close the height of the rod, for the regulation instructions.

3, the valve and pipe welding, the valve should be opened, the proper use of wet material to protect the neck, minimize heat conduction, to prevent damage to packing parts.

4, closed the valve is forbidden to use the force lever, the gate closed to the top of the hａnd wheel should be rotated ½ turn so that the gate in a floating state.

5, the valve during use, should be regularly injected into the bonnet grease fittings quantitative grease.

6, the valve in use, as a result of wearing parts and leakage, should be promptly replaced.

7, the valve in the overhaul process, should clean the cavity, the assembly should be the transmission parts plus grease.

8, the valve storage is disabled, the gate should be closed, long-term storage should be placed in a ventilated and dry place, regular inspection and maintenance.