Details
Junhle coating pressure screen, especially used in high viscosity and high temperature boring filtration.
Through mechanical scraping to automatically remove the particle impurities on the outer surface of the filter element, continuous online filtration can be achieved. High precision filter design (precision range: 20-500 μ m) can avoid crushing impurities to the greatest extent, so as to remove more impurities efficiently. It is suitable for filtration of water and various viscous liquids with viscosity up to 800000 CP. The self-cleaning operation mode of junhle coating pressure screen always keeps the filter element clean regularly, and discharges the waste liquid with high concentration impurities, so as to reduce the material waste and avoid the traditional problems such as frequent manual cleaning, large investment, heavy work and serious material waste.
Main technical parameters:
Product model: rf-50
■ filtration area (M2): 0.6 M2
Applicable liquid: water and viscous liquid (< 80000cps), impurity mass < 1000ppm
Filter element type material: V-slot slot metal filter element, material 316L
■ filtering accuracy: 125 mesh (according to customer requirements)
■ reduction motor: Sew imported reducer df63l4-sf57 dr63l4180w
■ inlet and outlet connection type: DN 125 flange connection
■ shell material: 316L
■ scraper material: polytetrafluoroethylene
■ shell sealing material: Viton (FKM) fluororubber (sealing material depends on the filter material provided by customers)
■ drain valve: DN80 flange connection
■ main control box model: Siemens control box
The working principle of the coating pressure screen: after the unfiltered coating enters the inner screen chamber through the pipeline, the coarse and fine separation starts under the centrifugal action of the transmission rotor and the screw scraper; at the same time, under the pressure in the pipeline, the fine coating moves to the spiral screen drum and enters the outer screen chamber through the screen slot, and then is directly transported to the coating knife through the outlet pipe; the coarse coating and the coating that fails to pass the screen seam are respectively rotated by the rotor The screw scraper which is close to the inner surface of the spiral screen drum is cleaned to the coarse material pipe at the bottom of the inner screen chamber in accordance with the screw direction of the spiral screen drum, and then sent back to the crusher for grinding by manual or automatic slag discharge valve.