Welcome Customer !

Membership

Shanghai junle Filtration Technology Co., Ltd.
Free Member ·1YRS
ShangHai,ShangHai
Manufacturer

Main Products: Filter Screen

Xwboo>Products
Product Categories

Shanghai junle Filtration Technology Co., Ltd.Free·1YRS

  • E-mail

    junhler@163.com

  • Phone

    021-51061871

  • Address

    2nd floor, 0, Lane 255, Xiaotang Road, Fengxian District, Shanghai

Contact Now

Degree Pressure Screen

Model
Nature of the Manufacturer
Manufacturer
Product Category
Place of Origin
ShangHai City, ShangHai Province
Overview
Degree Pressure Screen
Product Details

Details

There are two kinds of curved screen: pressure curved screen and gravity curved screen.

Treatment principle and structure:

The pressure curved screen is a kind of efficiency screen which depends on the pressure wet material. It is composed of screen surface, screen box, feeding device and outlet. Screen surface is the key component of pressure curved screen. It is made of stainless steel screen bar. During operation, the wet material is ejected from the nozzle under the pressure of 0.2-0.4mpa. The triangular screen wedge forms a knife edge so that the material can be wiped into a thin layer, and the water and fine materials are evenly dispersed. The so-called "scraping" function is to make the materials easy to be graded and the whole screen surface can be self-cleaning. The material on the screen is discharged from the slag outlet, and the material under the screen enters the slurry outlet.

The technological conditions and factors affecting the screening effect are as follows

When the operating pressure is controlled between 0.2 and 0.4MPa, the screening efficiency is high and the production capacity is large. If the pressure is low, the screening efficiency is low and the production capacity is low. During screening, the dry matter content of feed is about 17%, and the starch milk is screened out for the first time. The SO2 content in slurry should be between 0.035% and 0.045%.

Material: 316L or selected material.

Performance parameters:

1. Screen surface arc angle: 120 ° or selected radian

2. Screen gap width: 50um, 75um, 100um, 150um, 200um

3. Material handling capacity: 34 ~ 46m3 / h 4. Feeding pressure: 0.2 ~ 0.4MPa

5. Screen surface width: 585mm, 710mm, 825mm

6. Arc radius of screen surface: 762mm

7. The screen surface can be used in both directions with long service life.

The factors affecting the screening efficiency are as follows

1. Feeding pressure. The feeding pressure should be 0.2 ~ 0.4MPa. The higher the pressure, the higher the screening efficiency. The lower the pressure, the lower the screening efficiency.

2. The nozzle should be tangent to the screen arc surface. If the installation accuracy is too poor, it will not be possible to produce the cutting effect, so the screen surface will not be able to screen the materials, or the movement direction will be changed due to the obstruction of the material movement. At this time, the screen surface will also lose the function of screening materials.

3. The influence of pre screening fine grinding process: it is not allowed to grind too fine, otherwise the fine residue particles will enter the starch milk together with the small starch particles, which will increase the slag content in the starch milk.

Note: junle company has a large number of pressure screen stock, 50 μ, 75 μ, 100 μ, 120 μ, 150 μ in stock, with favorable price, two-way use and long service life.

Similar Product Recommend