Welcome Customer !

Membership

Suzhou Skytest Equipment C0., LTD.
Free Member ·1YRS
SuZhou,JiangSu
Manufacturer

Main Products: Testing Machines

Xwboo>Products
Product Categories

Suzhou Skytest Equipment C0., LTD.Free·1YRS

  • E-mail

    sales@szskytest.com

  • Phone

    0086-512-50353429,50358506

  • Address

    No. 122, Xinyangxi Road, Kunshan,Jiangsu, China

Contact Now

Impact Test Device(IK7-10)

Model
Nature of the Manufacturer
Manufacturer
Product Category
LED Lamp test equipment
Place of Origin
SuZhou City, JiangSu Province
Overview
Impact Test Device(IK7-10)
Product Details
Impact Test Device(IK7-10)

This device is designed according to IEC62062/GB20138, IEC60068(GB2423.55). Compliance with impact level IK7~10. IK code level meaning and difference as following:

IK code numerical characteristics and significant: Each characteristic number represents a impact energy, as table 1.

Table 1  IK code and related correspondence impact energy

IK code

IK00

IK01

IK02

IK03

IK04

IK05

IK06

IK07

IK08

IK09

IK10

Impact energy/J

a

0.14

0.2

0.35

0.5

0.7

1

2

5

10

20

Remarks:1. If demand higher impact energies, recommended values 50 J.

2. Some countries standards using one digital number representation of impact energy, in order to avoid confusion, so choose two characteristics numbers.

a  No protection according to this standard.

Application of IK code:

Usually, the protection degree is suitable for the whole shell. Such as some parts of the shell has a different degree of protection, should mark the corresponding protection degree.

1.      Including 4 kind of impact hammer IK07~10, respectively 2/5/10/20J;

2.      Different IK code level need replace to be different specifications of impact hammer;

3.      With portal frame installation method and sample installation jigs;

4.      Equipment main material: Uses aluminium alloy support and 6060 thick square support;

5.      Sample mounting bracket can electric hoist, convenient for testing different parts of the samples;

6.      The sample holder can rotate every 45 degrees, convenient to test samples of different angles;

7.      At the back of the equipment uses 6060 iron support simulating rigid support;

8.      Sample pretreatment and preparation: Unless otherwise stated in the relevant product standard, all of the tested sample shell should be clean, new and complete. Sample installation, assembly and location conditions (for example, by simulating plane such as ceiling, the ground or wall, etc.), in actual use condition to test as much as possible;

9.      Before the test, please confirm whether it should be preprocessing and electricity in accordance with the specific product usage; If there are moving parts inside the shell, then need to confirm whether the experiment is carried out under the motion state;

10.   Sample installation: With soft belt, fixed the sample on the platform, the location try to close to the normal use position as far as possible;

11.   Trigger mechanism for manual simulation, adopt the way of releasing positioning pin;

12.   Secondary impact preventing: Manual control.

Print this article   Back to higher   Back to top