Use Range: Non-silicone Thermal pad are base on special resins. They donot make circuit failure ,because they donot have siloxane volatilization and silicone oil seeping. The products have good tensile strength and wear resistance.
Product Description
Non-silicone Thermal pad are base on special resins. Non-silicone Thermal pad do not make circuit failure,because they do not have siloxane volatilization and silicone oil seeping. Non-silicone Thermal pad have good tensile strength and wear resistance.
Applications
◆ Power battery pack
◆ Vehicle navigator
◆ Optical precision equipment 、Camera equipmen
◆ Notebook computer
◆ and communication equipment
◆ Automotive engine control equipment
◆ High end industrial control and medical electronics


Videos
Product Parameters
| Non-silicone thermal pad |
| Item | AF100 | AF150 | AF300 | AF500 | AF500G | AF600 | AF600G | AF800 | Visual |
| Color | White | Light blue | Light yellow | Off White | White | Matcha | Pink | Off white | —— |
| Thickness | 0.25 ~ 5.0mm | 0.25 ~ 5.0mm | 0.5 ~ 5.0mm | 0.5 ~ 5.0mm | 0.5 ~ 5.0mm | 0.5 ~ 5.0mm | 0.5 ~ 5.0mm | 0.5 ~ 5.0mm | ASTM D374 |
| Specific Gravity | 1.6g/cm3 | 1.8g/cm3 | 2.3g/cm3 | 2.9g/cm3 | 3.0g/cm3 | 2.78g/cm3 | 3.1g/cm3 | 3.4g/cm3 | ASTM D792 |
| Thermal Conductivity | 1.0 W/mK | 1.50 W/mK | 2.0 W/mK | 3.0 W/mK | 3.50 W/mK | 5.0 W/mK | 6.0 W/mK | 8.0 W/mK | ASTM D5470 |
| Hardness(shore oo) | 45~90。 | 50~90。 | 40~90。 | 45~90。 | 45~90。 | 70~85。 | 75±5。 | 70。 | ASTM D2240 |
| Elongation | 250% | 150% | 150% | 99% | 99% | 30% | 50% | 50% | ASTM D412 |
| Tensile Strength | 75psi | 150psi | 55psi | 40psi | 40psi | 30psi | 30psi | 30psi | ASTM D412 |
| Electrical strength | >200VAC/mil | >200VAC/mil | >200VAC/mil | >200VAC/mil | >200VAC/mil | >200VAC/mil | >200VAC/mil | >200VAC/mil | ASTM D149 |
| Flammability Rating | 94 V-0 | 94 V-0 | 94 V-0 | 94 V-0 | 94 V-0 | 94 V-0 | 94 V-0 | 94 V-0 | UL 94 |
| Volume Resistivity | 1013Ω.cm | 1013Ω.cm | 1013Ω.cm | 1013Ω.cm | 1013Ω.cm | 1010Ω.cm | 1013Ω.cm | 1011Ω.cm | ASTM D257 |
| Operating Temperature | -40 ~ 120℃ | -40 ~ 120℃ | -40 ~ 120℃ | -40 ~ 120℃ | -40 ~ 120℃ | -40 ~ 120℃ | -40 ~ 125℃ | -40 ~ 125℃ | —— |
| Thermal Resistance(1mm,@40psi) | 1.10℃*in2/W | 1.0℃*in2/W | 0.8℃*in2/W | 0.6℃*in2/W | 0.6℃*in2/W | 0.25℃*in2/W | 0.25℃*in2/W | 0.1℃*in2/W | ASTM D5470 |
| Compression Ratio(1mm,@40psi) | 30% | 30% | 35% | 35% | 35% | 20% | 20% | 40% | —— |
| RoHS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | IEC 62321 |
| Halogen | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | EN14582 |
| REACH | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | EN14372 |
Test fixtures were tested using ASTM D5470. Recorded values include interface thermal resistance. These values are for reference only. The actual application performance is directly related to the applied surface roughness, flatness and pressure.