Face recognition swing gate

Face recognition swing gate product introduction

The face recognition swing gate integrates an access control system, an all-in-one card reader, which can realize face opening, QR code recognition opening, IC card reading opening, phone NFC opening, ID card opening, etc. A method of opening the gate, using 304 stainless steel, through modular design, standard interface design, simple assembly, easy maintenance. Through the embedded ARM management system, the access control system and the face recognition system are integrated, and the visitor system is seamlessly connected to realize the safety and convenience from the registration authorization to the opening of the gate, and the exit and logout until the end of the visit. The face recognition swing gate is suitable for the speed gate series of pedestrian passage gates, which are used in places with heavy traffic such as airports, high-speed railway stations, bus stations, and commercial buildings.

Face recognition swing gate function

Passage of gates: linkage with visitor machine, or customer docking access control/face reader, after realizing registration authorization, swipe IC card, ID card physical card number, receipt QR code, small program QR code, person Open the gate with face, health code, etc.;

Gate control method: The visitor platform issues permissions to the ARM control system, face recognition machine, reader, access controller, etc. to switch gates; staff remotely open and close the gates through the network;

Access notification methods: projection lamp prompt, indicator lamp prompt, voice prompt, display screen prompt;

Gate pass modes: 10 modes such as two-way swiping, two-way swiping, prohibition, free passage, normally open, and normally closed;

Infrared beaming function: pass detection, intelligent anti-pinch, gate breaking warning, detention warning, reverse warning, trailing warning, etc.;

Intelligent display function: it can display the information of the person who swiped the card, the passage reminder, all kinds of warning reminders, etc.;

Gate status monitoring: Through the Android system, data can be sent and received through the 232 serial port to monitor the status of the gate, and then uploaded to the platform through the network;

Passing record uploading: Obtaining the card-swiping line record through the access control, obtaining the card-swiping line record through the Android system main control, and obtaining the face-swiping pass record through the face recognition machine;

Alarm information acquisition: Obtain the gate alarm information from the gate main control board through the Android system. According to the upload time of the alarm information, track the trailing and illegal intruders through the camera capture;

Secondary opening function: the device can be turned on again after entering the card or the reverse intruder exits, effectively guaranteeing the lawful passage rights of the card reader (this function is very practical in the authorization control scenarios such as scenic spots and stations);

Illegal impact: When a pedestrian breaks through the gate without receiving an authorized entry signal, the door wing is locked, and it can resist a certain impact;

Open the door after power off: The passage has no brake after power off and can be pushed open; it can be fire-fighting linkage, press the fire-fighting button to open normally;

Product parameter

Product material: 304 brushed stainless steel

Working temperature: -35~60℃

Working environment: indoor/outdoor

Opposite channel: 1200MM

Appearance size: 1200*280*980MM

Movement: Anti-collision movement

Traffic direction: one-way / two-way